AT28C64E-20PI belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This product is primarily used for non-volatile storage of digital data in various electronic devices such as microcontrollers, computers, and consumer electronics.
The AT28C64E-20PI comes in a 28-pin plastic dual in-line package (PDIP). It is typically sold in quantities of one or more.
The AT28C64E-20PI has the following pin configuration:
The AT28C64E-20PI utilizes EEPROM technology, which allows for non-volatile storage of digital data. It consists of a grid of memory cells that can be individually programmed or erased using electrical signals. When data is written to the chip, it is stored in the memory cells by altering the charge on specific transistors. The stored data can be read back by applying appropriate voltage levels to the address and control pins.
The AT28C64E-20PI finds applications in various fields, including:
Several alternative models with similar functionality are available in the market. Some notable alternatives to the AT28C64E-20
Sure! Here are 10 common questions and answers related to the application of AT28C64E-20PI in technical solutions:
Q: What is the AT28C64E-20PI? A: The AT28C64E-20PI is a 64K (8K x 8) Electrically Erasable Programmable Read-Only Memory (EEPROM) chip.
Q: What is the operating voltage range for the AT28C64E-20PI? A: The AT28C64E-20PI operates within a voltage range of 4.5V to 5.5V.
Q: How much data can the AT28C64E-20PI store? A: The AT28C64E-20PI can store up to 64 kilobits (8 kilobytes) of data.
Q: What is the maximum clock frequency supported by the AT28C64E-20PI? A: The AT28C64E-20PI supports a maximum clock frequency of 20 MHz.
Q: Can the AT28C64E-20PI be reprogrammed multiple times? A: Yes, the AT28C64E-20PI is electrically erasable and programmable, allowing it to be reprogrammed multiple times.
Q: What is the access time of the AT28C64E-20PI? A: The AT28C64E-20PI has an access time of 200 ns, meaning it takes 200 nanoseconds to retrieve data from the memory.
Q: Does the AT28C64E-20PI require any external power supply or voltage regulator? A: No, the AT28C64E-20PI can be directly powered by a 5V power supply without the need for any external voltage regulator.
Q: Can the AT28C64E-20PI operate in harsh environments? A: The AT28C64E-20PI is designed to operate within an industrial temperature range of -40°C to +85°C, making it suitable for harsh environments.
Q: What interface does the AT28C64E-20PI use for communication? A: The AT28C64E-20PI uses a standard parallel interface for communication with microcontrollers or other devices.
Q: Are there any special considerations for programming the AT28C64E-20PI? A: Yes, the AT28C64E-20PI requires specific programming voltages and timing sequences, which should be followed as per the datasheet provided by the manufacturer.
Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.