La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
AT28C64E-25PI

AT28C64E-25PI

Product Overview

Category

AT28C64E-25PI belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is commonly used for non-volatile storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Electrically erasable: The AT28C64E-25PI can be erased and reprogrammed electronically, making it convenient for updating data.
  • Non-volatile: The stored data remains even when power is removed.
  • High capacity: This chip has a capacity of 64 kilobits, allowing for substantial data storage.
  • Low power consumption: The AT28C64E-25PI operates on low power, making it suitable for battery-powered devices.

Package

The AT28C64E-25PI comes in a 28-pin dual in-line package (DIP), which is a common form factor for integrated circuits.

Essence

The essence of this product lies in its ability to store and retrieve digital information reliably and efficiently.

Packaging/Quantity

The AT28C64E-25PI is typically packaged in tubes or trays, with each containing a specific quantity of chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Operating voltage: 2.7V to 5.5V
  • Access time: 250ns
  • Organization: 8,192 words x 8 bits
  • Endurance: 10,000 write/erase cycles
  • Data retention: 10 years

Detailed Pin Configuration

The AT28C64E-25PI has a total of 28 pins, each serving a specific purpose. Here is a detailed pin configuration:

  1. A0 - Address Input
  2. A1 - Address Input
  3. A2 - Address Input
  4. A3 - Address Input
  5. A4 - Address Input
  6. A5 - Address Input
  7. A6 - Address Input
  8. A7 - Address Input
  9. VCC - Power Supply
  10. OE - Output Enable
  11. CE - Chip Enable
  12. WE - Write Enable
  13. I/O0 - Data Input/Output
  14. I/O1 - Data Input/Output
  15. I/O2 - Data Input/Output
  16. I/O3 - Data Input/Output
  17. I/O4 - Data Input/Output
  18. I/O5 - Data Input/Output
  19. I/O6 - Data Input/Output
  20. I/O7 - Data Input/Output
  21. NC - No Connection
  22. NC - No Connection
  23. NC - No Connection
  24. GND - Ground
  25. NC - No Connection
  26. NC - No Connection
  27. NC - No Connection
  28. NC - No Connection

Functional Features

The AT28C64E-25PI offers the following functional features:

  • Byte-wise programmable: The chip allows individual bytes to be programmed or erased, providing flexibility in data manipulation.
  • Hardware and software protection: It supports various protection mechanisms to prevent unauthorized access or accidental modification of stored data.
  • High-speed operation: With a fast access time of 250ns, this EEPROM chip enables efficient data retrieval.

Advantages and Disadvantages

Advantages

  • Electrically erasable and reprogrammable, allowing for easy updates and modifications.
  • Non-volatile storage ensures data retention even during power loss.
  • High capacity provides ample space for storing large amounts of data.
  • Low power consumption makes it suitable for battery-powered devices.

Disadvantages

  • Limited endurance of 10,000 write/erase cycles may be a constraint in certain applications.
  • Relatively slower access time compared to other types of memory chips.

Working Principles

The AT28C64E-25PI utilizes a combination of electronic circuits and floating gate transistors to store and retrieve data. When programming or erasing, an electric charge is applied to the floating gate, altering its electrical characteristics. This change determines whether the transistor represents a logical "0" or "1". During read operations, the stored charge is measured to determine the stored data.

Detailed Application Field Plans

The AT28C64E-25PI finds application in various fields, including:

  1. Microcontrollers: Used for storing firmware, configuration settings, and calibration data.
  2. Computers: Employed in BIOS chips, expansion cards, and other storage requirements.
  3. Consumer Electronics: Utilized in devices like digital cameras, smart TVs, and gaming consoles for data storage.

Detailed and Complete Alternative Models

  1. AT28C64B-15PU: A similar EEPROM chip with a lower access time of 150ns. 2

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AT28C64E-25PI en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of AT28C64E-25PI in technical solutions:

  1. Q: What is the AT28C64E-25PI? A: The AT28C64E-25PI is a 64K (8K x 8) Electrically Erasable Programmable Read-Only Memory (EEPROM) chip.

  2. Q: What is the operating voltage range for the AT28C64E-25PI? A: The AT28C64E-25PI operates within a voltage range of 4.5V to 5.5V.

  3. Q: How much data can the AT28C64E-25PI store? A: The AT28C64E-25PI can store up to 64 kilobits (8 kilobytes) of data.

  4. Q: What is the access time of the AT28C64E-25PI? A: The AT28C64E-25PI has an access time of 250 nanoseconds (ns).

  5. Q: Can the AT28C64E-25PI be reprogrammed multiple times? A: Yes, the AT28C64E-25PI is electrically erasable and can be reprogrammed multiple times.

  6. Q: What is the endurance rating of the AT28C64E-25PI? A: The AT28C64E-25PI has an endurance rating of at least 100,000 erase/write cycles.

  7. Q: Does the AT28C64E-25PI require any external power supply or voltage regulator? A: No, the AT28C64E-25PI can be directly powered by a 5V power supply.

  8. Q: Can the AT28C64E-25PI operate in harsh environments? A: The AT28C64E-25PI is designed to operate within an industrial temperature range of -40°C to +85°C, making it suitable for harsh environments.

  9. Q: What interface does the AT28C64E-25PI use for communication? A: The AT28C64E-25PI uses a standard 8-bit parallel interface for communication with the microcontroller or other devices.

  10. Q: Is the AT28C64E-25PI compatible with common microcontrollers? A: Yes, the AT28C64E-25PI is compatible with most microcontrollers that support 8-bit parallel communication and have sufficient I/O pins available.

Please note that these answers are based on general knowledge and may vary depending on specific application requirements.