La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
AT28HC256-70JC

AT28HC256-70JC

Product Overview

Category

AT28HC256-70JC belongs to the category of high-speed, low-power Electrically Erasable Programmable Read-Only Memory (EEPROM) chips.

Use

This product is primarily used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.

Characteristics

  • High-speed operation
  • Low power consumption
  • Non-volatile memory
  • Large storage capacity
  • Reliable data retention
  • Easy to interface with other electronic components

Package

AT28HC256-70JC comes in a standard 32-pin PLCC (Plastic Leaded Chip Carrier) package. The package provides mechanical protection and facilitates easy integration into circuit boards.

Essence

The essence of AT28HC256-70JC lies in its ability to store and retrieve digital information reliably, even when the power supply is removed. This makes it an essential component for preserving critical data in electronic systems.

Packaging/Quantity

AT28HC256-70JC is typically sold in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact packaging and quantity may vary depending on the manufacturer and supplier.

Specifications

  • Operating Voltage: 2.7V to 5.5V
  • Storage Capacity: 256 kilobits (32 kilobytes)
  • Access Time: 70 nanoseconds
  • Interface: Parallel
  • Data Retention: Up to 10 years
  • Endurance: 100,000 write cycles

Detailed Pin Configuration

The AT28HC256-70JC chip has a total of 32 pins, which are assigned specific functions. The pin configuration is as follows:

  1. A0 - Address Input
  2. A1 - Address Input
  3. A2 - Address Input
  4. A3 - Address Input
  5. A4 - Address Input
  6. A5 - Address Input
  7. A6 - Address Input
  8. A7 - Address Input
  9. A8 - Address Input
  10. A9 - Address Input
  11. A10 - Address Input
  12. A11 - Address Input
  13. A12 - Address Input
  14. A13 - Address Input
  15. A14 - Address Input
  16. A15 - Address Input
  17. /OE - Output Enable
  18. /WE - Write Enable
  19. /CE - Chip Enable
  20. I/O0 - Data Input/Output
  21. I/O1 - Data Input/Output
  22. I/O2 - Data Input/Output
  23. I/O3 - Data Input/Output
  24. I/O4 - Data Input/Output
  25. I/O5 - Data Input/Output
  26. I/O6 - Data Input/Output
  27. I/O7 - Data Input/Output
  28. Vcc - Power Supply
  29. GND - Ground
  30. NC - No Connection
  31. NC - No Connection
  32. /WP - Write Protect

Functional Features

  • High-speed operation allows for quick data access and transfer.
  • Low power consumption ensures efficient use of energy in electronic devices.
  • Non-volatile memory retains stored data even when the power supply is disconnected.
  • Large storage capacity provides ample space for storing critical information.
  • Easy interface with other electronic components simplifies integration into various systems.

Advantages and Disadvantages

Advantages

  • Fast operation speed enables rapid data processing.
  • Low power consumption prolongs battery life in portable devices.
  • Reliable data retention ensures data integrity over extended periods.
  • Ample storage capacity accommodates a wide range of applications.
  • Easy integration with other components simplifies system design.

Disadvantages

  • Limited endurance of 100,000 write cycles may be a constraint in certain applications.
  • Higher cost compared to other memory technologies like Flash or SRAM.

Working Principles

AT28HC256-70JC utilizes EEPROM technology, which allows for both reading and writing of data. It stores information by trapping electric charges within its memory cells. When data needs to be written, the charges are manipulated using electrical signals. During read operations, the trapped charges are detected and converted back into digital information.

Detailed Application Field Plans

AT28HC256-70JC finds application in various fields, including:

  1. Microcontrollers: Used for storing firmware, configuration settings, and calibration data.
  2. Computers: Employed in BIOS (Basic Input/Output System) chips for storing system startup instructions.
  3. Consumer Electronics: Utilized in devices such as smart TVs, set-top boxes, and gaming consoles for data storage purposes.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to AT28HC256-70JC include:

  1. AT28C256 - Low-power CMOS version

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AT28HC256-70JC en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of AT28HC256-70JC in technical solutions:

  1. Q: What is the AT28HC256-70JC? A: The AT28HC256-70JC is a high-speed, low-power CMOS 256K (32K x 8) EEPROM memory chip.

  2. Q: What are the key features of the AT28HC256-70JC? A: Some key features include a 70ns access time, wide operating voltage range, byte and page-level write operations, and low power consumption.

  3. Q: What is the typical application of the AT28HC256-70JC? A: The AT28HC256-70JC is commonly used in embedded systems, microcontrollers, data loggers, industrial control systems, and other applications that require non-volatile memory storage.

  4. Q: How does the AT28HC256-70JC connect to a microcontroller or system? A: The AT28HC256-70JC connects to a microcontroller or system via a standard parallel interface, typically using address, data, and control lines.

  5. Q: Can the AT28HC256-70JC be easily replaced with other memory chips? A: Yes, the AT28HC256-70JC has a widely used pinout and can be easily replaced with compatible EEPROM or flash memory chips.

  6. Q: What is the maximum operating frequency of the AT28HC256-70JC? A: The AT28HC256-70JC can operate at frequencies up to 20MHz, allowing for fast data transfer and access.

  7. Q: Does the AT28HC256-70JC support multiple write cycles? A: Yes, the AT28HC256-70JC supports a minimum of 1,000,000 write cycles, ensuring durability and reliability.

  8. Q: Can the AT28HC256-70JC retain data without power? A: Yes, the AT28HC256-70JC is non-volatile, meaning it can retain data even when power is disconnected.

  9. Q: What is the operating temperature range of the AT28HC256-70JC? A: The AT28HC256-70JC has an extended operating temperature range of -40°C to +85°C, making it suitable for various environments.

  10. Q: Are there any specific programming requirements for the AT28HC256-70JC? A: Yes, the AT28HC256-70JC requires a dedicated programmer or microcontroller with EEPROM programming capabilities to write data into the memory.

Please note that these answers are general and may vary depending on the specific application and requirements.