AT28LV010-25TC belongs to the category of programmable read-only memory (PROM) chips.
It is primarily used for storing data that needs to be permanently stored and cannot be modified or erased.
AT28LV010-25TC is available in a Thin Small Outline Package (TSOP), which ensures compactness and ease of integration into electronic circuits.
The essence of AT28LV010-25TC lies in its ability to provide non-volatile storage for critical data in various electronic applications.
AT28LV010-25TC is typically packaged in reels containing a quantity of 2,500 units per reel.
The AT28LV010-25TC chip has a total of 32 pins, each serving a specific function. The pin configuration is as follows:
Pin 1: Chip Enable (CE)
Pin 2: Output Enable (OE)
Pin 3: Write Enable (WE)
Pin 4-11: Address Inputs (A0-A7)
Pin 12-27: Data Input/Output (D0-D15)
Pin 28: VCC (Power Supply)
Pin 29: Ground (GND)
Pin 30: Address Input (A8)
Pin 31: Chip Enable Output (CEO)
Pin 32: Ready/Busy Output (R/B)
AT28LV010-25TC utilizes electrically erasable programmable read-only memory (EEPROM) technology. It stores data by trapping electrical charges in floating gate transistors. These charges represent binary values, which can be read by applying appropriate voltage levels to the chip's pins.
AT28LV010-25TC finds applications in various fields, including: 1. Consumer electronics: Used in digital cameras, MP3 players, and gaming consoles for firmware storage. 2. Automotive industry: Utilized in engine control units (ECUs) and infotainment systems for critical data storage. 3. Industrial automation: Employed in programmable logic controllers (PLCs) for storing configuration data and program code. 4. Medical devices: Used in medical equipment for storing patient data and firmware.
In conclusion, AT28LV010-25TC is a versatile PROM chip that offers non-volatile storage with high capacity, fast access times, and low power consumption. Its applications span across various industries, making it an essential component in electronic devices requiring reliable and permanent data storage.
Sure! Here are 10 common questions and answers related to the application of AT28LV010-25TC in technical solutions:
Q: What is the AT28LV010-25TC? A: The AT28LV010-25TC is a low-voltage, high-performance Electrically Erasable Programmable Read-Only Memory (EEPROM) chip.
Q: What is the operating voltage range of AT28LV010-25TC? A: The AT28LV010-25TC operates within a voltage range of 2.7V to 5.5V.
Q: What is the storage capacity of AT28LV010-25TC? A: The AT28LV010-25TC has a storage capacity of 1 Megabit (128K x 8 bits).
Q: What is the maximum clock frequency supported by AT28LV010-25TC? A: The AT28LV010-25TC supports a maximum clock frequency of 25 MHz.
Q: Can I reprogram the AT28LV010-25TC multiple times? A: Yes, the AT28LV010-25TC is electrically erasable and can be reprogrammed multiple times.
Q: What is the typical programming time for AT28LV010-25TC? A: The typical programming time for AT28LV010-25TC is around 5 milliseconds.
Q: Does AT28LV010-25TC require any external power supply or voltage regulator? A: No, the AT28LV010-25TC does not require any external power supply or voltage regulator as it operates within the specified voltage range.
Q: Can AT28LV010-25TC operate in harsh environmental conditions? A: Yes, the AT28LV010-25TC is designed to operate in a wide temperature range (-40°C to +85°C) and can withstand harsh environmental conditions.
Q: What are some common applications of AT28LV010-25TC? A: The AT28LV010-25TC is commonly used in embedded systems, automotive electronics, industrial control systems, and various other electronic devices that require non-volatile memory storage.
Q: Is AT28LV010-25TC compatible with standard microcontrollers? A: Yes, the AT28LV010-25TC is compatible with most standard microcontrollers and can be easily integrated into existing designs.
Please note that these answers are general and may vary depending on specific technical requirements and application scenarios.