Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
AT45DB321C-TU
Ver Detalle Hojas de datos

AT45DB321C-TU

Product Overview

Category

AT45DB321C-TU belongs to the category of flash memory devices.

Use

It is primarily used for data storage and retrieval in various electronic devices.

Characteristics

  • Non-volatile memory
  • High-speed data transfer
  • Low power consumption
  • Small form factor
  • Reliable and durable

Package

AT45DB321C-TU is available in a small outline package (SOP) format.

Essence

The essence of AT45DB321C-TU lies in its ability to provide reliable and high-speed data storage in a compact package.

Packaging/Quantity

AT45DB321C-TU is typically packaged in reels, with each reel containing a specific quantity of devices.

Specifications

  • Memory capacity: 32 megabits (4 megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating voltage: 2.7V to 3.6V
  • Operating temperature range: -40°C to +85°C
  • Data retention: Up to 20 years
  • Erase/program cycles: 10,000 minimum

Detailed Pin Configuration

The AT45DB321C-TU has a total of 8 pins, which are as follows:

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Reset (/RESET)
  7. VCC (Power supply)
  8. Ground (GND)

Functional Features

  • Page-based architecture for efficient data management
  • Continuous read capability for fast data retrieval
  • Sector protection for enhanced data security
  • Software and hardware write protection options
  • Automatic sleep mode for power saving

Advantages and Disadvantages

Advantages

  • High-speed data transfer enables quick access to stored information.
  • Low power consumption prolongs battery life in portable devices.
  • Small form factor allows for integration into compact electronic systems.
  • Reliable and durable, ensuring data integrity over extended periods.

Disadvantages

  • Limited storage capacity compared to higher-end flash memory devices.
  • Higher cost per megabyte compared to traditional hard disk drives.

Working Principles

AT45DB321C-TU utilizes the Serial Peripheral Interface (SPI) to communicate with the host device. It stores data in non-volatile memory cells, which retain information even when power is disconnected. The device employs various algorithms and error correction techniques to ensure data reliability and integrity.

Detailed Application Field Plans

AT45DB321C-TU finds applications in a wide range of electronic devices, including but not limited to: - Smartphones and tablets - Digital cameras - Portable media players - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  1. AT45DB161E-TU: 16 megabits (2 megabytes) memory capacity
  2. AT45DB641E-TU: 64 megabits (8 megabytes) memory capacity
  3. AT45DB1282D-TU: 128 megabits (16 megabytes) memory capacity

These alternative models offer different memory capacities to suit specific application requirements.

Word count: 410 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AT45DB321C-TU en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of AT45DB321C-TU in technical solutions:

  1. Q: What is AT45DB321C-TU? A: AT45DB321C-TU is a serial flash memory chip manufactured by Adesto Technologies. It has a capacity of 32 megabits (4 megabytes) and operates on a serial interface.

  2. Q: What are the typical applications of AT45DB321C-TU? A: AT45DB321C-TU is commonly used in various embedded systems, IoT devices, industrial automation, automotive electronics, and other applications that require non-volatile storage.

  3. Q: What is the operating voltage range for AT45DB321C-TU? A: The operating voltage range for AT45DB321C-TU is typically between 2.7V and 3.6V.

  4. Q: What is the maximum data transfer rate supported by AT45DB321C-TU? A: AT45DB321C-TU supports a maximum data transfer rate of up to 85 MHz when using the SPI (Serial Peripheral Interface) mode.

  5. Q: Can AT45DB321C-TU be used for code storage in microcontrollers? A: Yes, AT45DB321C-TU can be used for storing code in microcontrollers. It provides fast access times and can be directly interfaced with microcontrollers via SPI.

  6. Q: Does AT45DB321C-TU support wear-leveling algorithms? A: No, AT45DB321C-TU does not have built-in wear-leveling algorithms. If wear-leveling is required, it needs to be implemented at the software level.

  7. Q: What is the endurance rating of AT45DB321C-TU? A: AT45DB321C-TU has an endurance rating of 100,000 program/erase cycles per sector.

  8. Q: Can AT45DB321C-TU operate in harsh environments? A: Yes, AT45DB321C-TU is designed to operate in a wide temperature range (-40°C to +85°C) and can withstand vibration and shock.

  9. Q: Does AT45DB321C-TU support hardware data protection features? A: Yes, AT45DB321C-TU provides hardware-based protection features like software write protection, lockable sectors, and password protection.

  10. Q: Is AT45DB321C-TU compatible with other flash memory chips? A: AT45DB321C-TU follows the standard SPI protocol, so it should be compatible with other flash memory chips that also support SPI interface.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.