AT49BV002-12TI belongs to the category of non-volatile memory devices.
It is primarily used for storing and retrieving data in electronic systems.
The AT49BV002-12TI is available in a standard Thin Small Outline Package (TSOP) format.
The essence of AT49BV002-12TI lies in its ability to provide reliable, non-volatile memory storage for electronic systems.
The AT49BV002-12TI is typically packaged in reels or tubes, with each package containing a specific quantity of devices. The exact packaging and quantity may vary depending on the supplier.
The AT49BV002-12TI features a parallel interface with the following pin configuration:
The AT49BV002-12TI utilizes flash memory technology to store data. It employs a combination of floating-gate transistors and charge storage elements to retain information even when power is turned off. The device can be accessed using the parallel interface, allowing for random access to any memory location. Erase and program operations are performed on sectors or individual bytes/words, providing flexibility in data manipulation.
The AT49BV002-12TI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices
Its non-volatile nature, fast access time, and reliability make it suitable for storing firmware, configuration data, and other critical information in these applications.
Some alternative models that offer similar functionality to the AT49BV002-12TI include: - AT
Sure! Here are 10 common questions and answers related to the application of AT49BV002-12TI in technical solutions:
Q: What is the AT49BV002-12TI? A: The AT49BV002-12TI is a 2-megabit (256K x 8) CMOS flash memory device.
Q: What are the key features of the AT49BV002-12TI? A: The key features include a 12 ns access time, low power consumption, sector erase capability, and compatibility with various microcontrollers.
Q: How can I interface the AT49BV002-12TI with a microcontroller? A: The AT49BV002-12TI uses a standard parallel interface, making it compatible with most microcontrollers.
Q: Can I use the AT49BV002-12TI as a boot device? A: Yes, the AT49BV002-12TI can be used as a boot device due to its fast access time and sector erase capability.
Q: What voltage levels does the AT49BV002-12TI support? A: The AT49BV002-12TI supports a single power supply voltage range of 2.7V to 3.6V.
Q: Is the AT49BV002-12TI suitable for high-reliability applications? A: Yes, the AT49BV002-12TI is designed for high-reliability applications and offers a minimum endurance of 100,000 program/erase cycles.
Q: Can I perform in-system programming on the AT49BV002-12TI? A: Yes, the AT49BV002-12TI supports in-system programming, allowing you to update the memory contents while it is connected to the system.
Q: What is the typical power consumption of the AT49BV002-12TI? A: The typical power consumption of the AT49BV002-12TI is very low, with active current typically around 20 mA and standby current typically around 10 µA.
Q: Does the AT49BV002-12TI support hardware data protection? A: Yes, the AT49BV002-12TI provides hardware data protection features such as a write protect pin and a software command to protect specific sectors.
Q: Can I use the AT49BV002-12TI in automotive applications? A: Yes, the AT49BV002-12TI is suitable for automotive applications and meets the requirements of various automotive standards.
Please note that these answers are general and may vary depending on the specific application and requirements.