La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
AT49F002ANT-55TU

AT49F002ANT-55TU

Product Overview

Category

AT49F002ANT-55TU belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving data in electronic systems.

Characteristics

  • Non-volatile: The stored data remains intact even when power is removed.
  • High capacity: The AT49F002ANT-55TU has a storage capacity of 2 megabits (256 kilobytes).
  • Fast access time: It offers quick read and write operations, ensuring efficient data transfer.
  • Low power consumption: The device is designed to minimize power usage, making it suitable for battery-powered applications.

Package

The AT49F002ANT-55TU is available in a surface-mount TSOP package.

Essence

The essence of this product lies in its ability to provide reliable and high-capacity non-volatile memory storage for various electronic systems.

Packaging/Quantity

The AT49F002ANT-55TU is typically packaged in reels, with each reel containing a specific quantity of devices. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Memory Type: Flash
  • Memory Size: 2 Megabits (256 Kilobytes)
  • Supply Voltage: 2.7V - 3.6V
  • Access Time: 55ns
  • Interface: Parallel
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The AT49F002ANT-55TU features a parallel interface with the following pin configuration:

  1. A0 - Address Input
  2. A1 - Address Input
  3. A2 - Address Input
  4. A3 - Address Input
  5. A4 - Address Input
  6. A5 - Address Input
  7. A6 - Address Input
  8. A7 - Address Input
  9. A8 - Address Input
  10. A9 - Address Input
  11. A10 - Address Input
  12. A11 - Address Input
  13. A12 - Address Input
  14. A13 - Address Input
  15. A14 - Address Input
  16. A15 - Address Input
  17. A16 - Address Input
  18. A17 - Address Input
  19. A18 - Address Input
  20. A19 - Address Input
  21. A20 - Address Input
  22. BYTE# - Byte/Word Selection Input
  23. CE# - Chip Enable Input
  24. OE# - Output Enable Input
  25. WE# - Write Enable Input
  26. RESET# - Reset Input
  27. VCC - Power Supply
  28. GND - Ground
  29. DQ0 - Data Input/Output
  30. DQ1 - Data Input/Output
  31. DQ2 - Data Input/Output
  32. DQ3 - Data Input/Output
  33. DQ4 - Data Input/Output
  34. DQ5 - Data Input/Output
  35. DQ6 - Data Input/Output
  36. DQ7 - Data Input/Output

Functional Features

  • High-speed read and write operations
  • Sector erase capability for efficient data management
  • Hardware and software protection mechanisms to prevent unauthorized access or modification of data
  • Low power consumption in standby mode
  • Automatic sleep mode for further power savings

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • High storage capacity suitable for various applications.
  • Fast access time allows for quick data retrieval.
  • Low power consumption extends battery life in portable devices.

Disadvantages

  • Limited endurance: Flash memory has a finite number of erase/write cycles.
  • Relatively higher cost compared to other types of memory.

Working Principles

The AT49F002ANT-55TU utilizes flash memory technology, which is based on the principle of trapping electrical charges in a floating gate. These trapped charges represent binary data (0 or 1). The device uses a combination of transistors and capacitors to store and retrieve data.

During write operations, an electric charge is applied to the control gate, allowing electrons to tunnel through the insulating layer and become trapped in the floating gate. This process alters the threshold voltage of the memory cell, representing the desired data value.

During read operations, the stored charge is measured by applying a voltage to the control gate and sensing the resulting current flow. The magnitude of the current determines the stored data value.

Detailed Application Field Plans

The AT49F002ANT-55TU can be used in various applications, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the AT49F002ANT-55TU

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AT49F002ANT-55TU en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of AT49F002ANT-55TU in technical solutions:

  1. Q: What is the AT49F002ANT-55TU? A: The AT49F002ANT-55TU is a 2-megabit (256K x 8) flash memory device manufactured by Atmel.

  2. Q: What are the main features of the AT49F002ANT-55TU? A: The main features include a 5-volt power supply, fast read and write operations, low power consumption, and compatibility with various microcontrollers.

  3. Q: How can I interface the AT49F002ANT-55TU with a microcontroller? A: The AT49F002ANT-55TU uses a standard parallel interface, making it compatible with most microcontrollers. You can connect it using address, data, and control lines.

  4. Q: What is the maximum operating frequency of the AT49F002ANT-55TU? A: The AT49F002ANT-55TU supports a maximum operating frequency of 55 MHz.

  5. Q: Can I use the AT49F002ANT-55TU for code storage in my embedded system? A: Yes, the AT49F002ANT-55TU is commonly used for code storage in various embedded systems due to its high capacity and fast access times.

  6. Q: Does the AT49F002ANT-55TU support in-system programming (ISP)? A: No, the AT49F002ANT-55TU does not support in-system programming. It requires a separate programmer device for programming.

  7. Q: What is the typical endurance of the AT49F002ANT-55TU? A: The AT49F002ANT-55TU has a typical endurance of 10,000 erase/write cycles per sector.

  8. Q: Can I use the AT49F002ANT-55TU in automotive applications? A: Yes, the AT49F002ANT-55TU is suitable for automotive applications as it meets the necessary temperature and reliability requirements.

  9. Q: What is the operating temperature range of the AT49F002ANT-55TU? A: The AT49F002ANT-55TU can operate within a temperature range of -40°C to +85°C.

  10. Q: Are there any specific precautions I need to take while handling the AT49F002ANT-55TU? A: It is recommended to follow standard ESD (Electrostatic Discharge) precautions while handling the AT49F002ANT-55TU to prevent any damage to the device.

Please note that these answers are general and may vary depending on the specific application and requirements.