AT49F002N-90TC

Product Overview

Category

AT49F002N-90TC belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving data in electronic systems.

Characteristics

• Non-volatile: The stored data is retained even when power is removed.
• High capacity: The AT49F002N-90TC has a storage capacity of 2 megabits (256 kilobytes).
• Fast access time: It operates at a maximum access time of 90 nanoseconds.
• Low power consumption: The device is designed to minimize power usage.
• Reliable: It offers high endurance and data retention capabilities.
• Easy integration: The AT49F002N-90TC can be easily integrated into various electronic systems.

Package

The AT49F002N-90TC is available in a standard 32-pin Thin Small Outline Package (TSOP).

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

The AT49F002N-90TC is typically packaged in reels, with each reel containing a specific quantity of devices. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

• Storage Capacity: 2 megabits (256 kilobytes)
• Access Time: 90 nanoseconds
• Supply Voltage: 5V
• Operating Temperature Range: -40°C to +85°C
• Package Type: 32-pin TSOP

Detailed Pin Configuration

1. A0 - Address Input
2. A1 - Address Input
3. A2 - Address Input
4. A3 - Address Input
5. A4 - Address Input
6. A5 - Address Input
7. A6 - Address Input
8. A7 - Address Input
9. A8 - Address Input
10. A9 - Address Input
11. A10 - Address Input
12. A11 - Address Input
13. A12 - Address Input
14. A13 - Address Input
15. A14 - Address Input
16. A15 - Address Input
17. /OE - Output Enable
18. /CE - Chip Enable
19. /WE - Write Enable
20. VCC - Power Supply
21. DQ0 - Data Input/Output
22. DQ1 - Data Input/Output
23. DQ2 - Data Input/Output
24. DQ3 - Data Input/Output
25. DQ4 - Data Input/Output
26. DQ5 - Data Input/Output
27. DQ6 - Data Input/Output
28. DQ7 - Data Input/Output
29. /RP - Ready/Busy Output
30. /BYTE - Byte/Word Organization Selection
31. GND - Ground
32. NC - No Connection

Functional Features

• High-speed data access: The AT49F002N-90TC offers fast access times, allowing for efficient data retrieval.
• Easy integration: It can be easily integrated into various electronic systems due to its standard pin configuration and package.
• Non-volatile storage: The stored data remains intact even when power is removed, ensuring data integrity.
• Low power consumption: The device is designed to minimize power usage, making it suitable for battery-powered applications.
• Reliable performance: The AT49F002N-90TC provides high endurance and data retention capabilities, ensuring long-term reliability.

Advantages and Disadvantages

Advantages

• Non-volatile memory ensures data retention.
• High capacity allows for storing large amounts of data.
• Fast access time enables quick data retrieval.
• Low power consumption is suitable for battery-powered devices.
• Reliable performance ensures data integrity.

Disadvantages

• Limited storage capacity compared to some other memory devices.
• Higher cost compared to certain lower-capacity alternatives.

Working Principles

The AT49F002N-90TC utilizes flash memory technology to store and retrieve data. It employs a combination of floating-gate transistors and charge storage mechanisms to retain data even when power is removed. The device uses address inputs, control signals, and data input/output lines to facilitate data access and manipulation.

Detailed Application Field Plans

The AT49F002N-90TC finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

In embedded systems, it can be used for firmware storage, configuration data storage, or program code storage. In consumer electronics, it can be utilized for storing user settings, firmware updates, or multimedia data. Automotive electronics may employ this device for storing calibration data, system parameters, or diagnostic information. Industrial control systems can benefit from its use in storing