AT49LV002T-70TI

Product Overview

Category

AT49LV002T-70TI belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

• Non-volatile: The AT49LV002T-70TI retains data even when power is removed.
• High capacity: It has a storage capacity of 2 megabits (256 kilobytes).
• Fast access time: The device offers a fast access time of 70 nanoseconds.
• Low power consumption: It operates on low power, making it suitable for battery-powered devices.

Package

The AT49LV002T-70TI is available in a Thin Small Outline Package (TSOP) with 32 pins.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

The AT49LV002T-70TI is typically packaged in reels or tubes, with each package containing a specific quantity of devices. The exact quantity may vary depending on the supplier.

Specifications

• Memory Type: Flash
• Memory Size: 2 Megabits (256 Kilobytes)
• Access Time: 70 Nanoseconds
• Interface: Parallel
• Supply Voltage: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The AT49LV002T-70TI has a total of 32 pins. Here is the detailed pin configuration:

1. A0 - Address Input
2. A1 - Address Input
3. A2 - Address Input
4. A3 - Address Input
5. A4 - Address Input
6. A5 - Address Input
7. A6 - Address Input
8. A7 - Address Input
9. A8 - Address Input
10. A9 - Address Input
11. A10 - Address Input
12. A11 - Address Input
13. A12 - Address Input
14. A13 - Address Input
15. A14 - Address Input
16. A15 - Address Input
17. CE - Chip Enable
18. OE - Output Enable
19. WE - Write Enable
20. I/O0 - Data Input/Output
21. I/O1 - Data Input/Output
22. I/O2 - Data Input/Output
23. I/O3 - Data Input/Output
24. I/O4 - Data Input/Output
25. I/O5 - Data Input/Output
26. I/O6 - Data Input/Output
27. I/O7 - Data Input/Output
28. VCC - Power Supply
29. GND - Ground
30. NC - No Connection
31. RP - Ready/Busy Output
32. RESET - Reset Input

Functional Features

• High-speed read and write operations
• Sector erase capability for efficient memory management
• Low power consumption in standby mode
• Automatic sleep mode to conserve energy
• Hardware and software data protection mechanisms
• Easy integration into existing systems with parallel interface

Advantages and Disadvantages

Advantages

• Non-volatile memory ensures data retention even during power loss.
• Fast access time allows for quick retrieval of stored information.
• Low power consumption makes it suitable for battery-powered devices.
• Sector erase capability enables efficient memory management.

Disadvantages

• Limited storage capacity compared to other memory devices.
• Parallel interface may require additional circuitry for compatibility with certain systems.
• Higher cost per unit compared to some alternative models.

Working Principles

The AT49LV002T-70TI utilizes flash memory technology to store and retrieve digital information. It employs a parallel interface for data transfer between the device and the host system. The memory cells within the device are organized into sectors, allowing for efficient erasure and rewriting of specific sections of memory.

Detailed Application Field Plans

The AT49LV002T-70TI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

1. AT49BV002T-70TI: Similar to AT49LV002T-70TI, but with a lower operating voltage range (2.7V - 3.3V).
2. AT49LV004T-70TI: Double the storage capacity of AT49LV002T-70TI (4 Megabits/512 Kilobytes).
3. AT49LV008T-70TI: Eight times the storage capacity of AT49LV002T-70TI (8 Megabits/1 Megabyte).

These alternative models offer similar functionality and characteristics, providing options for different