Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
AT89LP51ID2-20AU
Ver Detalle Hojas de datos

AT89LP51ID2-20AU

Product Overview

Category

AT89LP51ID2-20AU belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require a high level of control and processing capabilities.

Characteristics

  • High-performance 8-bit microcontroller
  • Low-power consumption
  • Integrated flash memory for program storage
  • Multiple I/O ports for versatile connectivity
  • On-chip peripherals for enhanced functionality

Package

AT89LP51ID2-20AU is available in a compact and durable package, suitable for surface mount technology (SMT) applications.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities in a wide range of electronic devices.

Packaging/Quantity

AT89LP51ID2-20AU is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of microcontrollers. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Architecture: 8-bit
  • Clock Speed: 20 MHz
  • Flash Memory: 8 KB
  • RAM: 512 bytes
  • Operating Voltage: 2.7V - 5.5V
  • Number of I/O Pins: 32
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 3
  • ADC Channels: 8
  • PWM Channels: 4

Detailed Pin Configuration

The AT89LP51ID2-20AU microcontroller has a total of 32 pins, each serving a specific purpose. Here is the detailed pin configuration:

  1. P0.0 - Port 0, Pin 0
  2. P0.1 - Port 0, Pin 1
  3. P0.2 - Port 0, Pin 2
  4. P0.3 - Port 0, Pin 3
  5. P0.4 - Port 0, Pin 4
  6. P0.5 - Port 0, Pin 5
  7. P0.6 - Port 0, Pin 6
  8. P0.7 - Port 0, Pin 7
  9. VCC - Power Supply
  10. GND - Ground
  11. P1.0 - Port 1, Pin 0
  12. P1.1 - Port 1, Pin 1
  13. P1.2 - Port 1, Pin 2
  14. P1.3 - Port 1, Pin 3
  15. P1.4 - Port 1, Pin 4
  16. P1.5 - Port 1, Pin 5
  17. P1.6 - Port 1, Pin 6
  18. P1.7 - Port 1, Pin 7
  19. RST - Reset Pin
  20. XTAL1 - Crystal Oscillator Input
  21. XTAL2 - Crystal Oscillator Output
  22. P2.0 - Port 2, Pin 0
  23. P2.1 - Port 2, Pin 1
  24. P2.2 - Port 2, Pin 2
  25. P2.3 - Port 2, Pin 3
  26. P2.4 - Port 2, Pin 4
  27. P2.5 - Port 2, Pin 5
  28. P2.6 - Port 2, Pin 6
  29. P2.7 - Port 2, Pin 7
  30. ALE/PROG - Address Latch Enable/Program Pin
  31. PSEN - Program Store Enable Pin
  32. EA/VPP - External Access/Programming Voltage Supply Pin

Functional Features

The AT89LP51ID2-20AU microcontroller offers several functional features that enhance its usability and performance:

  1. High-speed processing capabilities for efficient execution of instructions.
  2. On-chip flash memory allows for easy program storage and updates.
  3. Multiple I/O ports enable seamless connectivity with external devices.
  4. Integrated communication interfaces (UART, SPI, I2C) facilitate data exchange.
  5. Timers/counters provide precise timing control for various applications.
  6. Analog-to-digital converter (ADC) channels enable measurement of analog signals.
  7. Pulse-width modulation (PWM) channels allow for precise control of output signals.

Advantages and Disadvantages

Advantages

  • High-performance 8-bit microcontroller suitable for a wide range of applications.
  • Low-power consumption ensures energy efficiency.
  • Integrated flash memory simplifies program storage and updates.
  • Versatile I/O ports enable flexible connectivity options.
  • On-chip peripherals enhance functionality and reduce external component requirements.

Disadvantages

  • Limited

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AT89LP51ID2-20AU en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of AT89LP51ID2-20AU in technical solutions:

  1. Q: What is the AT89LP51ID2-20AU microcontroller used for? A: The AT89LP51ID2-20AU is a high-performance 8-bit microcontroller commonly used in various technical solutions, including embedded systems, industrial automation, and consumer electronics.

  2. Q: What is the operating voltage range of the AT89LP51ID2-20AU? A: The AT89LP51ID2-20AU operates within a voltage range of 2.7V to 5.5V.

  3. Q: How much flash memory does the AT89LP51ID2-20AU have? A: The AT89LP51ID2-20AU has 64KB of flash memory for program storage.

  4. Q: Can I interface the AT89LP51ID2-20AU with external devices? A: Yes, the AT89LP51ID2-20AU supports various communication interfaces like UART, SPI, and I2C, allowing you to easily interface it with external devices.

  5. Q: Does the AT89LP51ID2-20AU have any analog-to-digital converters (ADC)? A: Yes, the AT89LP51ID2-20AU has an integrated 10-bit ADC with up to 8 channels, enabling you to measure analog signals.

  6. Q: What is the maximum clock frequency of the AT89LP51ID2-20AU? A: The AT89LP51ID2-20AU can operate at a maximum clock frequency of 20MHz.

  7. Q: Can I use the AT89LP51ID2-20AU for real-time applications? A: Yes, the AT89LP51ID2-20AU has built-in timers and interrupts that make it suitable for real-time applications.

  8. Q: Does the AT89LP51ID2-20AU have any on-chip memory for data storage? A: Yes, the AT89LP51ID2-20AU has 1KB of on-chip RAM for data storage during program execution.

  9. Q: Is the AT89LP51ID2-20AU compatible with other development tools and software? A: Yes, the AT89LP51ID2-20AU is compatible with popular development tools and software like Keil MDK and Atmel Studio.

  10. Q: Can I use the AT89LP51ID2-20AU in low-power applications? A: Yes, the AT89LP51ID2-20AU offers various power-saving modes, making it suitable for low-power applications where energy efficiency is important.

Please note that these answers are general and may vary depending on specific requirements and configurations.