Consulte las especificaciones para obtener detalles del producto.
ATMEGA8535-16PJ
Product Overview
Category
ATMEGA8535-16PJ belongs to the category of microcontrollers.
Use
This microcontroller is widely used in various electronic applications that require a programmable device for controlling and processing data.
Characteristics
- High-performance 8-bit RISC architecture
- Low power consumption
- Wide operating voltage range
- Large program memory size
- Multiple communication interfaces
- Integrated analog-to-digital converter (ADC)
- Real-time counter with separate oscillator
- In-system programmable flash memory
Package
ATMEGA8535-16PJ is available in a 40-pin plastic dual in-line package (DIP).
Essence
The essence of this microcontroller lies in its ability to provide a versatile and efficient solution for embedded systems, offering a wide range of features and functionalities.
Packaging/Quantity
ATMEGA8535-16PJ is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
Specifications
- Architecture: 8-bit AVR
- Flash Memory: 8KB
- RAM: 512 bytes
- EEPROM: 512 bytes
- Operating Voltage: 2.7V - 5.5V
- Max CPU Frequency: 16MHz
- Digital I/O Pins: 32
- Analog Input Channels: 8
- Communication Interfaces: UART, SPI, I2C
- ADC Resolution: 10-bit
- Timers/Counters: 3
- PWM Channels: 4
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The ATMEGA8535-16PJ microcontroller has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:
- RESET: Reset input
- XTAL1: Crystal oscillator input
- XTAL2: Crystal oscillator output
- GND: Ground
- VCC: Power supply
- PORTB0: Digital I/O pin
- PORTB1: Digital I/O pin
- PORTB2: Digital I/O pin
- PORTB3: Digital I/O pin
- PORTB4: Digital I/O pin
- PORTB5: Digital I/O pin
- PORTB6: Digital I/O pin
- PORTB7: Digital I/O pin
- AVCC: Analog power supply
- ADC0: Analog input channel
- ADC1: Analog input channel
- ADC2: Analog input channel
- ADC3: Analog input channel
- ADC4: Analog input channel
- ADC5: Analog input channel
- AREF: Analog reference voltage
- GND: Ground
- PORTC0: Digital I/O pin
- PORTC1: Digital I/O pin
- PORTC2: Digital I/O pin
- PORTC3: Digital I/O pin
- PORTC4: Digital I/O pin
- PORTC5: Digital I/O pin
- PORTC6: Digital I/O pin
- PORTC7: Digital I/O pin
- GND: Ground
- VCC: Power supply
- PORTD0: Digital I/O pin
- PORTD1: Digital I/O pin
- PORTD2: Digital I/O pin
- PORTD3: Digital I/O pin
- PORTD4: Digital I/O pin
- PORTD5: Digital I/O pin
- PORTD6: Digital I/O pin
- PORTD7: Digital I/O pin
Functional Features
- High-speed and efficient processing capabilities
- Flexible and programmable I/O pins
- Integrated analog-to-digital converter for precise measurements
- Multiple communication interfaces for data exchange
- In-system programmable flash memory for easy updates
- Real-time counter with separate oscillator for accurate timing
- PWM channels for generating analog-like signals
- Low power consumption for energy-efficient applications
Advantages and Disadvantages
Advantages
- Versatile and widely supported microcontroller
- Extensive range of features and functionalities
- Easy to program and integrate into electronic systems
- Low power consumption extends battery life in portable devices
- Large program memory size allows for complex applications
Disadvantages
- Limited RAM and EEPROM capacity compared to some other microcontrollers
- Lack of built-in hardware encryption for secure data transmission
- Relatively higher cost compared to lower-end microcontrollers
Working Principles
ATMEGA8535-16PJ operates based on the 8-bit AVR architecture. It executes instructions stored in its flash memory, processes data, and controls various peripherals and I/O pins according
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ATMEGA8535-16PJ en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of ATMEGA8535-16PJ in technical solutions:
Q: What is the ATMEGA8535-16PJ microcontroller used for? A: The ATMEGA8535-16PJ is a versatile microcontroller commonly used in various technical solutions, such as embedded systems, robotics, automation, and IoT applications.
Q: What is the operating voltage range of the ATMEGA8535-16PJ? A: The ATMEGA8535-16PJ operates within a voltage range of 2.7V to 5.5V.
Q: How many I/O pins does the ATMEGA8535-16PJ have? A: The ATMEGA8535-16PJ has a total of 32 I/O pins, which can be configured as inputs or outputs based on the application requirements.
Q: What is the maximum clock frequency supported by the ATMEGA8535-16PJ? A: The ATMEGA8535-16PJ can operate at a maximum clock frequency of 16 MHz.
Q: Does the ATMEGA8535-16PJ have built-in analog-to-digital converters (ADC)? A: Yes, the ATMEGA8535-16PJ has an 8-channel, 10-bit ADC module, allowing it to convert analog signals into digital values.
Q: Can the ATMEGA8535-16PJ communicate with other devices or microcontrollers? A: Yes, the ATMEGA8535-16PJ supports multiple communication interfaces, including UART, SPI, and I2C, enabling seamless communication with other devices.
Q: Is the ATMEGA8535-16PJ programmable in C/C++? A: Yes, the ATMEGA8535-16PJ can be programmed using C/C++ programming languages, making it easier for developers to write code for their applications.
Q: What is the flash memory size of the ATMEGA8535-16PJ? A: The ATMEGA8535-16PJ has a flash memory size of 8 KB, which can store program instructions and data.
Q: Can the ATMEGA8535-16PJ be powered by batteries? A: Yes, the ATMEGA8535-16PJ can be powered by batteries within the operating voltage range mentioned earlier.
Q: Are there any development boards or evaluation kits available for the ATMEGA8535-16PJ? A: Yes, there are several development boards and evaluation kits available that feature the ATMEGA8535-16PJ, providing a convenient platform for prototyping and testing applications.
Please note that these answers are general and may vary depending on specific implementations and configurations.