Consulte las especificaciones para obtener detalles del producto.
MIC24085AYML-TR
Product Overview
Category: Integrated Circuit (IC)
Use: Power Management IC
Characteristics: - High efficiency - Low power consumption - Small form factor - Wide input voltage range - Multiple protection features
Package: Surface Mount Technology (SMT)
Essence: The MIC24085AYML-TR is a power management integrated circuit designed for efficient power conversion and regulation in various electronic devices.
Packaging/Quantity: The MIC24085AYML-TR is available in tape and reel packaging, with 2500 units per reel.
Specifications
- Input Voltage Range: 4.5V to 60V
- Output Voltage Range: 0.8V to 55V
- Maximum Output Current: 5A
- Switching Frequency: 500kHz
- Efficiency: Up to 95%
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The MIC24085AYML-TR has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- FB: Feedback pin
- SS/TR: Soft-start/Tracking pin
- VOUT: Output voltage pin
- PG: Power good pin
- SW: Switching pin
Functional Features
- Wide input voltage range allows compatibility with various power sources.
- High efficiency ensures minimal power loss during conversion.
- Low power consumption enhances energy efficiency.
- Multiple protection features such as overvoltage, undervoltage, and overcurrent protection ensure safe operation.
- Soft-start and tracking functionality enable smooth startup and voltage tracking.
Advantages and Disadvantages
Advantages: - High efficiency results in reduced power consumption and heat generation. - Wide input voltage range provides flexibility in power source selection. - Multiple protection features enhance the safety and reliability of the device. - Small form factor allows for space-saving integration into compact electronic devices.
Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - Higher cost compared to traditional linear regulators.
Working Principles
The MIC24085AYML-TR utilizes a switching regulator topology to efficiently convert the input voltage to the desired output voltage. It employs pulse-width modulation (PWM) techniques to control the duty cycle of the switching transistor, regulating the output voltage. The integrated circuit incorporates various control mechanisms and feedback loops to maintain stable and accurate output voltage under different load conditions.
Detailed Application Field Plans
The MIC24085AYML-TR is widely used in various applications, including but not limited to: - Industrial automation systems - Automotive electronics - Telecommunications equipment - Power supplies - LED lighting - Battery-powered devices
Detailed and Complete Alternative Models
- MIC24086AYML-TR: Similar specifications with higher maximum output current (8A).
- MIC24087AYML-TR: Similar specifications with wider input voltage range (4.5V to 75V).
- MIC24088AYML-TR: Similar specifications with adjustable output voltage range (0.8V to 60V).
These alternative models provide options based on specific requirements and can be considered as alternatives to the MIC24085AYML-TR.
Word count: 420 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MIC24085AYML-TR en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of MIC24085AYML-TR in technical solutions:
Question: What is the MIC24085AYML-TR?
Answer: The MIC24085AYML-TR is a specific model of a power management integrated circuit (PMIC) designed for use in various technical solutions.Question: What are the key features of the MIC24085AYML-TR?
Answer: Some key features of the MIC24085AYML-TR include high efficiency, low quiescent current, wide input voltage range, and multiple output channels.Question: What technical solutions can the MIC24085AYML-TR be used in?
Answer: The MIC24085AYML-TR can be used in a wide range of applications, including industrial automation, consumer electronics, automotive systems, and more.Question: What is the input voltage range supported by the MIC24085AYML-TR?
Answer: The MIC24085AYML-TR supports an input voltage range from 4.5V to 42V, making it suitable for various power supply configurations.Question: How many output channels does the MIC24085AYML-TR have?
Answer: The MIC24085AYML-TR has four independent output channels, allowing for flexible power distribution in a system.Question: What is the maximum output current per channel of the MIC24085AYML-TR?
Answer: The MIC24085AYML-TR can provide a maximum output current of up to 1.5A per channel, depending on the specific configuration.Question: Does the MIC24085AYML-TR support any protection features?
Answer: Yes, the MIC24085AYML-TR includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.Question: Can the MIC24085AYML-TR be used in battery-powered applications?
Answer: Yes, the MIC24085AYML-TR is suitable for battery-powered applications due to its low quiescent current and efficient power conversion capabilities.Question: Is the MIC24085AYML-TR available in a surface-mount package?
Answer: Yes, the MIC24085AYML-TR is available in a small footprint surface-mount package, making it easy to integrate into compact designs.Question: Where can I find more detailed information about the MIC24085AYML-TR?
Answer: You can refer to the datasheet provided by the manufacturer or visit their official website for more detailed information about the MIC24085AYML-TR.