Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MIC49150BR TR
Ver Detalle Hojas de datos

MIC49150BR TR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, High Current, Adjustable Output
  • Package: TO-263-5 (D2PAK)
  • Essence: Regulates voltage to a desired level with low dropout and high current capability
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 16V
  • Output Voltage Range: 1.25V to 13.5V
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 300mV at 1.5A
  • Line Regulation: ±0.05% typical
  • Load Regulation: ±0.1% typical
  • Quiescent Current: 120µA typical
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC49150BR TR has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. ADJ: Output Voltage Adjustment
  4. NC: No Connection
  5. VOUT: Output Voltage

Functional Features

  • Low dropout voltage ensures efficient regulation even with small input-output differentials.
  • High output current capability allows for powering various loads.
  • Adjustable output voltage provides flexibility in different applications.
  • Excellent line and load regulation ensure stable output voltage under varying conditions.
  • Thermal shutdown and current limit protection features enhance device reliability.

Advantages

  • Wide input voltage range enables compatibility with various power sources.
  • Low dropout voltage minimizes power dissipation and improves efficiency.
  • High output current capability supports demanding load requirements.
  • Adjustable output voltage allows customization for specific applications.
  • Excellent line and load regulation ensure stable performance.
  • Thermal shutdown and current limit protection enhance device reliability.

Disadvantages

  • The TO-263-5 package may require additional board space compared to smaller packages.
  • The adjustable output voltage requires careful configuration to avoid incorrect settings.

Working Principles

The MIC49150BR TR is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage obtained from the output. Any difference between these voltages is amplified and used to adjust the pass transistor, maintaining the desired output voltage.

Detailed Application Field Plans

The MIC49150BR TR is suitable for various applications, including:

  1. Power supplies for microcontrollers and digital circuits.
  2. Battery-powered devices requiring stable voltage regulation.
  3. Automotive electronics, such as infotainment systems and lighting controls.
  4. Industrial control systems and automation equipment.
  5. Communication devices, including routers and modems.

Detailed and Complete Alternative Models

  1. LM1117-ADJ: Adjustable Voltage Regulator, TO-220 package, 800mA maximum output current.
  2. LT1086-ADJ: Adjustable Low Dropout Regulator, TO-220 package, 1.5A maximum output current.
  3. TPS7A4700: Adjustable Ultra-Low Dropout Regulator, TO-263-5 package, 1A maximum output current.

These alternative models offer similar functionality and can be considered based on specific requirements.

Word count: 324 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MIC49150BR TR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MIC49150BR TR in technical solutions:

  1. Q: What is MIC49150BR TR? A: MIC49150BR TR is a high-side MOSFET driver IC designed for driving N-channel enhancement-mode MOSFETs in various applications.

  2. Q: What is the maximum voltage rating of MIC49150BR TR? A: The maximum voltage rating of MIC49150BR TR is typically around 40V.

  3. Q: What is the maximum output current capability of MIC49150BR TR? A: MIC49150BR TR can typically provide a maximum output current of up to 4A.

  4. Q: Can MIC49150BR TR be used with both low-side and high-side MOSFETs? A: Yes, MIC49150BR TR can be used with both low-side and high-side MOSFETs, but it is specifically designed for high-side applications.

  5. Q: What is the input voltage range of MIC49150BR TR? A: The input voltage range of MIC49150BR TR is typically between 4.5V and 16V.

  6. Q: Does MIC49150BR TR have built-in protection features? A: Yes, MIC49150BR TR has built-in protection features such as thermal shutdown, under-voltage lockout, and over-current protection.

  7. Q: Can MIC49150BR TR operate at high temperatures? A: Yes, MIC49150BR TR is designed to operate at high temperatures and can typically handle temperatures up to 125°C.

  8. Q: What is the typical switching frequency of MIC49150BR TR? A: The typical switching frequency of MIC49150BR TR is around 500kHz.

  9. Q: Can MIC49150BR TR be used in automotive applications? A: Yes, MIC49150BR TR is suitable for automotive applications as it meets the necessary automotive standards and requirements.

  10. Q: What are some typical applications of MIC49150BR TR? A: Some typical applications of MIC49150BR TR include motor control, power distribution systems, LED lighting, and battery management systems.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.