Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MIC4950YFL-T5
Ver Detalle Hojas de datos

MIC4950YFL-T5

Product Overview

Category

MIC4950YFL-T5 belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a voltage regulator in electronic devices.

Characteristics

  • Low dropout voltage
  • High output current capability
  • Thermal shutdown protection
  • Short-circuit current limiting
  • Overcurrent and overtemperature protection

Package

MIC4950YFL-T5 is available in a small outline package (SOT-23-5).

Essence

The essence of MIC4950YFL-T5 lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

This product is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV at 500mA
  • Output Current: Up to 500mA
  • Quiescent Current: 120µA
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

MIC4950YFL-T5 has a total of five pins:

  1. GND (Ground)
  2. EN (Enable)
  3. FB (Feedback)
  4. VIN (Input Voltage)
  5. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage ensures efficient regulation even with small input-output differentials.
  • High output current capability allows for powering various electronic components.
  • Thermal shutdown protection prevents damage due to excessive heat.
  • Short-circuit current limiting protects the circuit from damage during short-circuit conditions.
  • Overcurrent and overtemperature protection safeguards the device and connected components.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • High output current capability
  • Comprehensive protection features

Disadvantages

  • Limited input voltage range (2.5V to 6.5V)
  • Relatively high quiescent current (120µA)

Working Principles

MIC4950YFL-T5 operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The feedback pin (FB) is used to monitor the output voltage and provide control signals to maintain the desired voltage level.

Detailed Application Field Plans

MIC4950YFL-T5 finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC4950YFL-T5 include: - LM1117-3.3 - LT1761ES5-3.3 - MCP1700-3302E/TO

These alternatives can be considered based on specific requirements and compatibility with the target application.

Word count: 346 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MIC4950YFL-T5 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MIC4950YFL-T5 in technical solutions:

  1. Q: What is MIC4950YFL-T5? A: MIC4950YFL-T5 is a voltage regulator IC (integrated circuit) designed for use in various technical solutions.

  2. Q: What is the input voltage range of MIC4950YFL-T5? A: The input voltage range of MIC4950YFL-T5 is typically between 2.7V and 16V.

  3. Q: What is the output voltage range of MIC4950YFL-T5? A: The output voltage range of MIC4950YFL-T5 can be adjusted from 0.8V to 5.5V using external resistors.

  4. Q: What is the maximum output current of MIC4950YFL-T5? A: The maximum output current of MIC4950YFL-T5 is 500mA.

  5. Q: Is MIC4950YFL-T5 suitable for battery-powered applications? A: Yes, MIC4950YFL-T5 is suitable for battery-powered applications as it has low quiescent current and high efficiency.

  6. Q: Can MIC4950YFL-T5 handle input voltage fluctuations? A: Yes, MIC4950YFL-T5 has built-in protection features like overcurrent protection and thermal shutdown to handle input voltage fluctuations.

  7. Q: Can I use MIC4950YFL-T5 in automotive applications? A: Yes, MIC4950YFL-T5 is automotive-grade and can be used in automotive applications.

  8. Q: Does MIC4950YFL-T5 require any external components for operation? A: Yes, MIC4950YFL-T5 requires a few external components like input and output capacitors for stable operation.

  9. Q: What is the operating temperature range of MIC4950YFL-T5? A: The operating temperature range of MIC4950YFL-T5 is typically between -40°C and +125°C.

  10. Q: Is MIC4950YFL-T5 available in different package options? A: Yes, MIC4950YFL-T5 is available in various package options like SOT-23, DFN, and MSOP to suit different application requirements.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications of MIC4950YFL-T5.