Consulte las especificaciones para obtener detalles del producto.
MIC5200-3.3BMM
Product Overview
Category
MIC5200-3.3BMM belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Low dropout voltage
- Low quiescent current
- High output voltage accuracy
- Thermal shutdown protection
- Short-circuit current limit
Package
MIC5200-3.3BMM is available in a miniature SOT-23 package.
Essence
The essence of MIC5200-3.3BMM lies in its ability to provide stable and regulated voltage output in various electronic applications.
Packaging/Quantity
This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.
Specifications
- Input Voltage Range: 2.5V to 16V
- Output Voltage: 3.3V
- Dropout Voltage: 120mV at 100mA
- Quiescent Current: 35µA
- Output Current: Up to 150mA
- Line Regulation: 0.05%/V
- Load Regulation: 0.1%/mA
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
MIC5200-3.3BMM has three pins:
- VIN (Pin 1): Input voltage pin.
- GND (Pin 2): Ground reference pin.
- VOUT (Pin 3): Regulated output voltage pin.
Functional Features
- Low dropout voltage ensures efficient regulation even when the input voltage is close to the desired output voltage.
- Low quiescent current minimizes power consumption during standby or idle conditions.
- High output voltage accuracy provides precise voltage regulation for sensitive electronic components.
- Thermal shutdown protection prevents damage due to excessive temperature.
- Short-circuit current limit protects the regulator and connected components from excessive current flow.
Advantages and Disadvantages
Advantages
- Compact size and lightweight.
- Wide input voltage range allows for versatile applications.
- Excellent voltage regulation performance.
- Low power consumption.
- Built-in protection features enhance reliability.
Disadvantages
- Limited output current capacity compared to higher-rated regulators.
- Higher dropout voltage compared to some newer regulator models.
Working Principles
MIC5200-3.3BMM operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The internal circuitry monitors the input and output voltages, adjusting the pass transistor as necessary to maintain a stable output voltage.
Detailed Application Field Plans
MIC5200-3.3BMM finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment - Communication devices
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to MIC5200-3.3BMM include: - LM1117-3.3 - LT1763-3.3 - MCP1703-3.3 - TPS73633
These alternatives can be considered based on specific requirements and design constraints.
Word count: 410 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MIC5200-3.3BMM en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of MIC5200-3.3BMM in technical solutions:
Q: What is MIC5200-3.3BMM? A: MIC5200-3.3BMM is a low-dropout (LDO) voltage regulator IC that provides a fixed output voltage of 3.3V.
Q: What is the input voltage range for MIC5200-3.3BMM? A: The input voltage range for MIC5200-3.3BMM is typically between 2.5V and 16V.
Q: What is the maximum output current of MIC5200-3.3BMM? A: MIC5200-3.3BMM can provide a maximum output current of 150mA.
Q: Can MIC5200-3.3BMM be used in battery-powered applications? A: Yes, MIC5200-3.3BMM is suitable for battery-powered applications as it has a low quiescent current and operates at low dropout voltages.
Q: Is MIC5200-3.3BMM short-circuit protected? A: Yes, MIC5200-3.3BMM has built-in short-circuit protection to prevent damage in case of a short circuit.
Q: Can I use MIC5200-3.3BMM to power microcontrollers or other digital ICs? A: Yes, MIC5200-3.3BMM is commonly used to power microcontrollers, digital ICs, and other low-power devices.
Q: Does MIC5200-3.3BMM require any external components for operation? A: Yes, MIC5200-3.3BMM requires input and output capacitors for stability. The datasheet provides recommended values.
Q: What is the dropout voltage of MIC5200-3.3BMM? A: The dropout voltage of MIC5200-3.3BMM is typically around 150mV at a 100mA load.
Q: Can I use MIC5200-3.3BMM in automotive applications? A: Yes, MIC5200-3.3BMM is suitable for automotive applications as it can operate within the required temperature range and has low EMI emissions.
Q: Are there any alternative voltage options available for MIC5200 series regulators? A: Yes, the MIC5200 series includes various fixed voltage options such as 2.5V, 3.0V, 3.3V, and 5.0V.