Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MIC5206-3.6BMM
Ver Detalle Hojas de datos

MIC5206-3.6BMM

Product Overview

Category

MIC5206-3.6BMM belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • High output accuracy
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit

Package

MIC5206-3.6BMM is available in a miniature SOT-23 package.

Essence

The essence of MIC5206-3.6BMM lies in its ability to provide a stable and regulated output voltage for various electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 2.5V to 16V
  • Output Voltage: 3.6V
  • Dropout Voltage: 120mV at 100mA
  • Quiescent Current: 35µA
  • Output Current: Up to 150mA
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

MIC5206-3.6BMM features a 5-pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. BYP (Bypass Capacitor)
  5. VOUT (Output Voltage)

Functional Features

  • Low Dropout Voltage: The low dropout voltage ensures efficient regulation even when the input voltage is close to the desired output voltage.
  • High Output Accuracy: MIC5206-3.6BMM provides precise and stable output voltage, ensuring reliable performance of connected devices.
  • Low Quiescent Current: The low quiescent current minimizes power consumption, making it suitable for battery-powered applications.
  • Thermal Shutdown Protection: The regulator includes thermal shutdown protection, preventing damage due to excessive heat.
  • Short-Circuit Current Limit: It incorporates a short-circuit current limit feature, protecting the circuit from excessive current flow.

Advantages and Disadvantages

Advantages

  • Compact size and lightweight
  • Wide input voltage range
  • Excellent output accuracy
  • Low power consumption
  • Built-in protection features

Disadvantages

  • Limited output current capacity
  • Requires an external bypass capacitor for optimal performance

Working Principles

MIC5206-3.6BMM operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. By comparing the output voltage with a reference voltage, the regulator adjusts the pass transistor to maintain a stable output voltage.

Detailed Application Field Plans

MIC5206-3.6BMM finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Embedded systems - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC5206-3.6BMM include: - LM1117-3.6V - LT1763-3.6 - MCP1703-3.6

These alternatives can be considered based on specific requirements and design constraints.

Word count: 346 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MIC5206-3.6BMM en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MIC5206-3.6BMM in technical solutions:

  1. Q: What is MIC5206-3.6BMM? A: MIC5206-3.6BMM is a low dropout (LDO) voltage regulator IC manufactured by Microchip Technology. It provides a fixed output voltage of 3.6V with a maximum output current of 150mA.

  2. Q: What are the typical applications of MIC5206-3.6BMM? A: MIC5206-3.6BMM is commonly used in battery-powered devices, portable electronics, and other low-power applications where a stable 3.6V power supply is required.

  3. Q: What is the input voltage range for MIC5206-3.6BMM? A: The input voltage range for MIC5206-3.6BMM is typically between 2.5V and 16V.

  4. Q: How much dropout voltage does MIC5206-3.6BMM have? A: MIC5206-3.6BMM has a typical dropout voltage of 200mV at 150mA load current.

  5. Q: Can MIC5206-3.6BMM handle higher output currents? A: No, the maximum output current for MIC5206-3.6BMM is 150mA. If higher output currents are required, a different LDO or voltage regulator should be considered.

  6. Q: Does MIC5206-3.6BMM have built-in thermal shutdown protection? A: Yes, MIC5206-3.6BMM features built-in thermal shutdown protection to prevent overheating and damage to the IC.

  7. Q: What is the operating temperature range for MIC5206-3.6BMM? A: MIC5206-3.6BMM can operate within a temperature range of -40°C to +125°C.

  8. Q: Does MIC5206-3.6BMM require any external components for operation? A: Yes, MIC5206-3.6BMM requires input and output capacitors for stability. The datasheet provides recommended values and guidelines for selecting these capacitors.

  9. Q: Can MIC5206-3.6BMM be used in automotive applications? A: Yes, MIC5206-3.6BMM is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.

  10. Q: Is there a specific PCB layout guideline for using MIC5206-3.6BMM? A: Yes, the datasheet of MIC5206-3.6BMM provides a recommended PCB layout guideline to minimize noise and ensure proper thermal dissipation.

Please note that the answers provided here are general and may vary depending on the specific requirements and conditions of your technical solution. Always refer to the official datasheet and consult with an expert for accurate information.