MIC5210-3.6BMM

Product Overview

Category

MIC5210-3.6BMM belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

• Package: The MIC5210-3.6BMM comes in a small form factor package.
• Essence: It is a low dropout (LDO) linear voltage regulator.
• Packaging/Quantity: Typically, it is available in tape and reel packaging with a quantity of 3000 units per reel.

Specifications

The specifications of MIC5210-3.6BMM are as follows:

• Output Voltage: 3.6V
• Dropout Voltage: 120mV at 100mA
• Maximum Input Voltage: 16V
• Quiescent Current: 75µA
• Load Regulation: ±0.5%
• Line Regulation: ±0.2%
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC5210-3.6BMM has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin
4. BYP: Bypass capacitor pin for noise reduction

Functional Features

The functional features of MIC5210-3.6BMM include:

• Low dropout voltage: The regulator maintains a stable output voltage even when the input voltage is close to the desired output voltage.
• Low quiescent current: It consumes minimal current when in standby mode, making it suitable for battery-powered applications.
• Thermal shutdown protection: The device automatically shuts down if the temperature exceeds the safe operating range, preventing damage to the regulator and the connected circuitry.
• Short-circuit protection: MIC5210-3.6BMM is designed to withstand short-circuit conditions without causing any damage.

Advantages and Disadvantages

Advantages

• Small form factor package allows for space-saving designs.
• Low dropout voltage ensures efficient regulation even with low input voltages.
• Wide operating temperature range makes it suitable for various environments.
• Thermal shutdown and short-circuit protection enhance reliability.

Disadvantages

• Limited output voltage options, as it is specifically designed for 3.6V output.

Working Principles

MIC5210-3.6BMM operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The regulator compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

MIC5210-3.6BMM finds applications in various electronic devices and circuits, including but not limited to:

1. Battery-powered devices: It can be used to regulate voltage in portable electronics such as smartphones, tablets, and wearable devices.
2. Industrial control systems: The regulator is suitable for use in control systems that require stable and reliable power supply.
3. Automotive electronics: It can be employed in automotive applications where regulated voltage is essential for proper functioning of electronic components.
4. IoT devices: MIC5210-3.6BMM can be utilized in Internet of Things (IoT) devices that operate on low power and require stable voltage regulation.

Detailed and Complete Alternative Models

Some alternative models to MIC5210-3.6BMM include:

1. LM1117-3.3: A popular LDO voltage regulator with a fixed output voltage of 3.3V.
2. LT1763: An ultra-low dropout linear regulator available in various output voltage options.
3. TPS7A4700: A high-performance LDO regulator with adjustable output voltage and low noise characteristics.

These alternative models offer similar functionality and can be considered as alternatives based on specific requirements.

In conclusion, MIC5210-3.6BMM is a voltage regulator that provides stable and regulated voltage for various electronic applications. Its small form factor, low dropout voltage, and wide operating temperature range make it suitable for diverse use cases. However, its limited output voltage options may restrict its applicability in certain scenarios.