MIC5225-3.0YM5-TR

Product Overview

Category

MIC5225-3.0YM5-TR belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

• Voltage regulation: MIC5225-3.0YM5-TR provides a stable output voltage.
• Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
• Low quiescent current: The regulator consumes minimal power when no load is connected.
• Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.
• Short-circuit protection: It safeguards against short-circuit conditions.

Package

MIC5225-3.0YM5-TR is available in a small surface-mount SOT-23-5 package.

Essence

The essence of MIC5225-3.0YM5-TR lies in its ability to provide reliable and regulated voltage output for various electronic applications.

Packaging/Quantity

This product is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

• Input Voltage Range: 2.3V to 6.0V
• Output Voltage: 3.0V
• Dropout Voltage: 150mV (typical)
• Quiescent Current: 120μA (typical)
• Maximum Output Current: 250mA
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC5225-3.0YM5-TR has five pins arranged as follows:

1. GND (Ground): Connected to the ground reference of the circuit.
2. VIN (Input Voltage): Receives the input voltage to be regulated.
3. VOUT (Output Voltage): Provides the regulated output voltage.
4. BYP (Bypass): Connects an external capacitor for stability and noise reduction.
5. EN (Enable): Controls the regulator's enable/disable state.

Functional Features

• Voltage Regulation: MIC5225-3.0YM5-TR maintains a stable output voltage of 3.0V, regardless of input voltage fluctuations.
• Low Dropout Voltage: It can operate efficiently even when the input voltage is only slightly higher than the desired output voltage.
• Low Quiescent Current: The regulator consumes minimal power when no load is connected, making it suitable for battery-powered applications.
• Thermal Shutdown Protection: It automatically shuts down if the temperature exceeds a safe limit, preventing damage to the device.
• Short-Circuit Protection: The regulator safeguards against short-circuit conditions, protecting both the device and the connected circuitry.

Advantages and Disadvantages

Advantages

• Provides stable and regulated output voltage.
• Low dropout voltage ensures efficient operation.
• Low quiescent current minimizes power consumption.
• Offers thermal shutdown and short-circuit protection.

Disadvantages

• Limited maximum output current of 250mA.
• Requires additional external components for proper operation.

Working Principles

MIC5225-3.0YM5-TR utilizes internal circuitry to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a constant output voltage. The regulator continuously monitors the input voltage, output voltage, and temperature to ensure stable and reliable performance.

Detailed Application Field Plans

MIC5225-3.0YM5-TR finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC5225-3.0YM5-TR include: - LM1117-3.3 - MCP1702-3002E/TO - TS2937CP-3.3

These alternatives can be considered based on specific requirements and availability.

Word count: 525 words