Consulte las especificaciones para obtener detalles del producto.
MIC5249-1.8BMM
Product Overview
Category
MIC5249-1.8BMM belongs to the category of voltage regulators.
Use
It is commonly used to regulate and stabilize voltage levels in electronic circuits.
Characteristics
- Low dropout voltage
- High output accuracy
- Low quiescent current
- Thermal shutdown protection
- Short-circuit current limit
Package
MIC5249-1.8BMM is available in a miniature 4mm x 4mm DFN package.
Essence
The essence of MIC5249-1.8BMM lies in its ability to provide a stable and regulated output voltage for various electronic applications.
Packaging/Quantity
This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.
Specifications
- Input Voltage Range: 2.3V to 5.5V
- Output Voltage: 1.8V
- Dropout Voltage: 150mV at 150mA
- Quiescent Current: 35µA (typical)
- Load Regulation: ±0.5% (typical)
- Line Regulation: ±0.2% (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
MIC5249-1.8BMM features the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- VOUT: Output voltage pin
Functional Features
- Low dropout voltage ensures efficient power conversion.
- High output accuracy provides precise voltage regulation.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents overheating.
- Short-circuit current limit protects the device from excessive current.
Advantages and Disadvantages
Advantages
- Compact size and easy integration into various circuit designs.
- Wide input voltage range allows for versatile applications.
- Excellent load and line regulation for stable output voltage.
- Low quiescent current prolongs battery life in portable devices.
Disadvantages
- Limited output voltage options, suitable only for 1.8V applications.
- Thermal shutdown protection may cause temporary interruptions in operation under high temperature conditions.
Working Principles
MIC5249-1.8BMM operates as a linear voltage regulator. It takes an input voltage within the specified range and regulates it to a constant 1.8V output voltage. The device uses a feedback mechanism to continuously adjust the internal pass transistor, compensating for any changes in input voltage or load conditions. This ensures a stable and accurate output voltage.
Detailed Application Field Plans
MIC5249-1.8BMM finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to MIC5249-1.8BMM include: - LM1117-1.8 - LT1763-1.8 - TPS79318
These alternatives can be considered based on specific requirements and design constraints.
In conclusion, MIC5249-1.8BMM is a voltage regulator with excellent characteristics such as low dropout voltage, high output accuracy, and thermal shutdown protection. Its compact size and wide input voltage range make it suitable for various applications in different industries. However, designers should consider the limited output voltage options and potential interruptions due to thermal shutdown when selecting this device.
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MIC5249-1.8BMM en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of MIC5249-1.8BMM in technical solutions:
Q1: What is MIC5249-1.8BMM? A1: MIC5249-1.8BMM is a low dropout (LDO) voltage regulator IC manufactured by Microchip Technology. It provides a fixed output voltage of 1.8V with a maximum output current of 150mA.
Q2: What are the typical applications of MIC5249-1.8BMM? A2: MIC5249-1.8BMM is commonly used in battery-powered devices, portable electronics, IoT devices, and other low-power applications where a stable 1.8V power supply is required.
Q3: What is the input voltage range for MIC5249-1.8BMM? A3: The input voltage range for MIC5249-1.8BMM is typically between 2.5V and 16V.
Q4: What is the dropout voltage of MIC5249-1.8BMM? A4: The dropout voltage of MIC5249-1.8BMM is typically around 200mV at a load current of 150mA.
Q5: Does MIC5249-1.8BMM have built-in thermal shutdown protection? A5: Yes, MIC5249-1.8BMM has built-in thermal shutdown protection that prevents the IC from overheating under excessive operating conditions.
Q6: Can MIC5249-1.8BMM operate in a wide temperature range? A6: Yes, MIC5249-1.8BMM can operate in a temperature range of -40°C to +125°C, making it suitable for various environmental conditions.
Q7: Is MIC5249-1.8BMM available in different package options? A7: Yes, MIC5249-1.8BMM is available in a SOT-23-5 package, which is a small surface-mount package commonly used in compact electronic designs.
Q8: Can I use MIC5249-1.8BMM to power other ICs or microcontrollers? A8: Yes, you can use MIC5249-1.8BMM to power other ICs or microcontrollers that require a stable 1.8V power supply within its maximum output current rating.
Q9: Does MIC5249-1.8BMM require any external components for operation? A9: Yes, MIC5249-1.8BMM requires a few external components such as input and output capacitors for stability and proper operation. The datasheet provides recommended values.
Q10: Where can I find more information about the application of MIC5249-1.8BMM? A10: You can find more detailed information about the application of MIC5249-1.8BMM in the datasheet provided by Microchip Technology. It includes electrical characteristics, application circuits, and design considerations.
Please note that the answers provided here are general and may vary depending on specific requirements and conditions. Always refer to the official datasheet and consult with technical experts for accurate and detailed information.