MIC5253-2.5YC5-TR belongs to the category of voltage regulators.
This product is commonly used to regulate voltage in electronic circuits.
MIC5253-2.5YC5-TR is available in a small surface-mount package.
The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic devices.
This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
MIC5253-2.5YC5-TR has the following pin configuration:
MIC5253-2.5YC5-TR operates based on the principle of voltage regulation. It takes an input voltage within the specified range and provides a regulated output voltage of 2.5V. The internal circuitry ensures that the output voltage remains constant even when the input voltage fluctuates.
MIC5253-2.5YC5-TR finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Medical equipment
Some alternative models that can be considered as alternatives to MIC5253-2.5YC5-TR are: - LM1117-2.5 - LT1761-2.5 - MCP1702-2.5
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
In conclusion, MIC5253-2.5YC5-TR is a voltage regulator with excellent characteristics such as compact size, low power consumption, and wide input voltage range. It provides stable and regulated voltage output for various electronic devices, making it suitable for a wide range of applications. However, its limited output current capacity restricts its use in high-power applications.
Question: What is the MIC5253-2.5YC5-TR?
Answer: The MIC5253-2.5YC5-TR is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 2.5V.
Question: What is the input voltage range for the MIC5253-2.5YC5-TR?
Answer: The input voltage range for this IC is typically between 2.7V and 16V.
Question: What is the maximum output current of the MIC5253-2.5YC5-TR?
Answer: The maximum output current of this IC is 150mA.
Question: Can the MIC5253-2.5YC5-TR be used in battery-powered applications?
Answer: Yes, the low dropout voltage and low quiescent current make it suitable for battery-powered applications.
Question: Is the MIC5253-2.5YC5-TR suitable for use in automotive electronics?
Answer: Yes, this IC is designed to meet the requirements of automotive applications, including AEC-Q100 qualification.
Question: Can the MIC5253-2.5YC5-TR be used in both step-up and step-down voltage regulation?
Answer: No, this IC is specifically designed for step-down (buck) voltage regulation.
Question: What is the typical efficiency of the MIC5253-2.5YC5-TR?
Answer: The typical efficiency of this IC is around 90% under normal operating conditions.
Question: Does the MIC5253-2.5YC5-TR have built-in thermal shutdown protection?
Answer: Yes, this IC includes thermal shutdown protection to prevent overheating.
Question: Can the MIC5253-2.5YC5-TR be used in high-temperature environments?
Answer: Yes, this IC is designed to operate in a wide temperature range, typically from -40°C to 125°C.
Question: What are some typical applications for the MIC5253-2.5YC5-TR?
Answer: Some common applications include powering microcontrollers, sensors, and other low-power electronic devices in various industrial, automotive, and consumer electronics applications.