MIC5268-1.2BM5TX

Product Overview

Category

MIC5268-1.2BM5TX belongs to the category of voltage regulators.

Use

This product is commonly used to regulate voltage in electronic circuits.

Characteristics

• Voltage regulation capability
• Low dropout voltage
• High output current
• Thermal shutdown protection
• Short-circuit protection

Package

MIC5268-1.2BM5TX is available in a small SOT-23-5 package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

MIC5268-1.2BM5TX is typically packaged in reels, with each reel containing a specific quantity of units. The exact quantity may vary depending on the manufacturer.

Specifications

• Input Voltage Range: 2.3V to 6.0V
• Output Voltage: 1.2V
• Output Current: Up to 150mA
• Dropout Voltage: 120mV (typical)
• Quiescent Current: 75µA (typical)
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC5268-1.2BM5TX has five pins arranged as follows:

```

---

| | | | |____| | | |__| ```

Pin 1: Enable (EN) - Active high enable pin for turning the regulator on/off. Pin 2: Ground (GND) - Connected to the ground reference of the circuit. Pin 3: Feedback (FB) - Provides feedback to regulate the output voltage. Pin 4: Output (OUT) - Supplies the regulated output voltage. Pin 5: Input (IN) - Receives the input voltage to be regulated.

Functional Features

• Low dropout voltage ensures efficient regulation even with small input-output differentials.
• Thermal shutdown protection prevents the regulator from overheating.
• Short-circuit protection safeguards the circuit against excessive current flow.

Advantages and Disadvantages

Advantages

• Provides stable and regulated output voltage.
• Suitable for low-power applications.
• Compact package size allows for space-saving designs.
• Offers thermal and short-circuit protection.

Disadvantages

• Limited output current capacity.
• Input voltage range may not be suitable for all applications.
• Requires external components for proper operation.

Working Principles

MIC5268-1.2BM5TX operates based on the principle of feedback control. The feedback pin continuously monitors the output voltage and adjusts the internal circuitry to maintain a constant output voltage, regardless of variations in the input voltage or load conditions. This ensures a stable and reliable power supply for connected electronic devices.

Detailed Application Field Plans

MIC5268-1.2BM5TX finds applications in various fields, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC5268-1.2BM5TX include: - LM1117-1.2 - MCP1700-1.2 - LP2985-1.2

These alternatives can be considered based on specific requirements and compatibility with the target application.

Word count: 452 words