Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MIC5303-2.5YMT-TR
Ver Detalle Hojas de datos

MIC5303-2.5YMT-TR

Product Overview

Category

MIC5303-2.5YMT-TR belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage Output: 2.5V
  • Package Type: YMT
  • Essence: Voltage regulator
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

The specifications for MIC5303-2.5YMT-TR are as follows:

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage: 2.5V ±2%
  • Maximum Output Current: 500mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The pin configuration for MIC5303-2.5YMT-TR is as follows:

  1. VIN: Input voltage
  2. GND: Ground
  3. EN: Enable pin
  4. BYP: Bypass capacitor connection
  5. VOUT: Output voltage

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent and thermal protection
  • Fast transient response
  • Stable output voltage

Advantages and Disadvantages

Advantages

  • Wide input voltage range
  • High output current capability
  • Small package size
  • Low power consumption

Disadvantages

  • Limited output voltage options
  • May require additional external components for specific applications

Working Principles

MIC5303-2.5YMT-TR operates based on a linear voltage regulation principle. It takes an input voltage within the specified range and provides a stable output voltage of 2.5V. The device uses internal circuitry to regulate the voltage and protect against overcurrent and thermal issues.

Detailed Application Field Plans

MIC5303-2.5YMT-TR finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to MIC5303-2.5YMT-TR are: - LM1117-2.5 - LT1761-2.5 - TPS78225

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, MIC5303-2.5YMT-TR is a voltage regulator with a 2.5V output voltage. It offers low dropout voltage, low quiescent current, and various protection features. This product finds applications in a wide range of electronic devices and has alternative models available for different design considerations.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MIC5303-2.5YMT-TR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MIC5303-2.5YMT-TR in technical solutions:

  1. Q: What is the MIC5303-2.5YMT-TR? A: The MIC5303-2.5YMT-TR is a low-dropout (LDO) voltage regulator IC that provides a fixed output voltage of 2.5V.

  2. Q: What is the input voltage range for the MIC5303-2.5YMT-TR? A: The input voltage range for the MIC5303-2.5YMT-TR is typically between 2.7V and 5.5V.

  3. Q: What is the maximum output current of the MIC5303-2.5YMT-TR? A: The maximum output current of the MIC5303-2.5YMT-TR is 500mA.

  4. Q: Can the MIC5303-2.5YMT-TR be used in battery-powered applications? A: Yes, the MIC5303-2.5YMT-TR can be used in battery-powered applications as it operates within a wide input voltage range and has low quiescent current.

  5. Q: Does the MIC5303-2.5YMT-TR require any external components for operation? A: Yes, the MIC5303-2.5YMT-TR requires a few external components such as input and output capacitors for stability and filtering.

  6. Q: What is the dropout voltage of the MIC5303-2.5YMT-TR? A: The dropout voltage of the MIC5303-2.5YMT-TR is typically around 200mV at full load.

  7. Q: Can the MIC5303-2.5YMT-TR handle transient voltage spikes? A: Yes, the MIC5303-2.5YMT-TR has built-in protection features to handle transient voltage spikes and protect downstream components.

  8. Q: Is the MIC5303-2.5YMT-TR available in different package options? A: Yes, the MIC5303-2.5YMT-TR is available in a variety of package options, including SOT-23 and DFN.

  9. Q: What is the operating temperature range for the MIC5303-2.5YMT-TR? A: The operating temperature range for the MIC5303-2.5YMT-TR is typically between -40°C and 125°C.

  10. Q: Can the MIC5303-2.5YMT-TR be used in noise-sensitive applications? A: Yes, the MIC5303-2.5YMT-TR has excellent line and load regulation characteristics, making it suitable for noise-sensitive applications.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.