MIC5366-2.9YMT-TZ

Product Overview

Category

MIC5366-2.9YMT-TZ belongs to the category of voltage regulators.

Use

This product is commonly used for regulating voltage in electronic circuits.

Characteristics

• Package: The MIC5366-2.9YMT-TZ comes in a small form factor package, making it suitable for space-constrained applications.
• Essence: It provides a stable output voltage regardless of input voltage fluctuations.
• Packaging/Quantity: The product is typically available in reels or tubes, with varying quantities depending on the supplier.

Specifications

The MIC5366-2.9YMT-TZ has the following specifications:

• Input Voltage Range: 2.5V to 5.5V
• Output Voltage: 2.9V
• Output Current: Up to 150mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 40µA (typical)
• Operating Temperature Range: -40°C to +125°C

Pin Configuration

The detailed pin configuration of MIC5366-2.9YMT-TZ is as follows:

1. VIN (Input Voltage)
2. GND (Ground)
3. EN (Enable)
4. BYP (Bypass)
5. VOUT (Output Voltage)

Functional Features

The key functional features of MIC5366-2.9YMT-TZ include:

• Low dropout voltage: The regulator maintains a low voltage drop between the input and output, ensuring efficient power conversion.
• Low quiescent current: The device consumes minimal current when in standby mode, reducing power consumption.
• Thermal shutdown protection: It incorporates thermal protection to prevent damage due to excessive temperature.
• Short-circuit protection: The regulator is designed to withstand short-circuit conditions without causing damage.

Advantages and Disadvantages

Advantages

• Small form factor package allows for easy integration into space-constrained designs.
• Wide input voltage range enables compatibility with various power sources.
• Low dropout voltage ensures efficient power conversion.
• Thermal shutdown and short-circuit protection enhance reliability.

Disadvantages

• Limited output current may not be suitable for high-power applications.
• Higher cost compared to some alternative models.

Working Principles

MIC5366-2.9YMT-TZ operates based on the principle of linear voltage regulation. It uses a feedback mechanism to maintain a constant output voltage regardless of changes in the input voltage or load conditions. The internal circuitry adjusts the pass transistor to regulate the output voltage within the specified range.

Detailed Application Field Plans

The MIC5366-2.9YMT-TZ is commonly used in various electronic devices and systems, including but not limited to:

1. Battery-powered devices: Portable electronics such as smartphones, tablets, and wearable devices benefit from the stable voltage supply provided by this regulator.
2. IoT (Internet of Things) devices: The low quiescent current and wide input voltage range make it suitable for powering IoT sensors and modules.
3. Industrial automation: Control systems and sensor networks often require regulated voltage for reliable operation, making this regulator an ideal choice.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC5366-2.9YMT-TZ include:

1. LM1117-2.9: A popular linear voltage regulator with a fixed 2.9V output voltage.
2. LT1763-2.9: A low dropout regulator capable of delivering higher output currents.
3. TPS73601DBVR: Another option with a 2.9V fixed output voltage and low dropout characteristics.

These alternative models can be considered based on specific application requirements and cost considerations.

In conclusion, the MIC5366-2.9YMT-TZ is a voltage regulator that provides stable output voltage in various electronic applications. Its small form factor, low dropout voltage, and wide input voltage range make it suitable for a range of devices. However, its limited output current and relatively higher cost should be taken into account when selecting an appropriate regulator for specific applications.