Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MIC94031YM4-TR
Ver Detalle Hojas de datos

MIC94031YM4-TR

Product Overview

Category

The MIC94031YM4-TR belongs to the category of analog switches and multiplexers.

Use

It is used for signal routing and switching in various electronic circuits.

Characteristics

  • Low on-resistance
  • Wide operating voltage range
  • Low power consumption
  • High bandwidth

Package

The MIC94031YM4-TR comes in a small 10-pin, 3mm x 3mm Thin MLF® package.

Essence

This product is essential for efficient signal routing and management in electronic systems.

Packaging/Quantity

The MIC94031YM4-TR is typically packaged in reels with a quantity of 3000 units per reel.

Specifications

  • Operating Voltage Range: 1.6V to 5.5V
  • On-Resistance: 0.6Ω (typical)
  • Bandwidth: 400MHz
  • Supply Current: 1μA (maximum)

Detailed Pin Configuration

The detailed pin configuration of the MIC94031YM4-TR is as follows: 1. IN1 2. IN2 3. GND 4. COM 5. NO1 6. NO2 7. V+ 8. NC 9. IN3 10. IN4

Functional Features

  • Low on-resistance for minimal signal attenuation
  • Wide operating voltage range for versatile applications
  • Low power consumption for energy efficiency
  • High bandwidth for fast signal switching

Advantages and Disadvantages

Advantages

  • Small package size
  • Low on-resistance
  • Wide operating voltage range

Disadvantages

  • Limited number of input channels
  • Higher cost compared to some alternatives

Working Principles

The MIC94031YM4-TR operates by selectively connecting the input signals to the output channels based on the control logic, allowing for efficient signal routing within electronic circuits.

Detailed Application Field Plans

The MIC94031YM4-TR is well-suited for various applications including: - Portable consumer electronics - Battery-powered devices - Communication systems - Industrial automation

Detailed and Complete Alternative Models

Some alternative models to the MIC94031YM4-TR include: - MAX4619 - ADG736 - TS5A3159

In conclusion, the MIC94031YM4-TR is a versatile analog switch with low on-resistance, wide operating voltage range, and high bandwidth, making it suitable for a wide range of electronic applications.

Word count: 324

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MIC94031YM4-TR en soluciones técnicas

  1. What is the MIC94031YM4-TR?

    • The MIC94031YM4-TR is a low-side load switch designed to operate in a wide input voltage range, making it suitable for various technical solutions.

  2. What is the maximum continuous current rating of the MIC94031YM4-TR?

    • The MIC94031YM4-TR has a maximum continuous current rating of 0.5A, making it suitable for low-power applications.

  3. What is the input voltage range of the MIC94031YM4-TR?

    • The input voltage range of the MIC94031YM4-TR is from 1.5V to 5.5V, allowing it to be used in a wide range of technical solutions.

  4. What are the typical applications of the MIC94031YM4-TR?

    • Typical applications of the MIC94031YM4-TR include portable and battery-powered equipment, USB peripherals, and power distribution systems.

  5. Does the MIC94031YM4-TR have built-in thermal shutdown protection?

    • Yes, the MIC94031YM4-TR features built-in thermal shutdown protection to prevent damage from excessive heat.

  6. What is the quiescent current of the MIC94031YM4-TR?

    • The quiescent current of the MIC94031YM4-TR is typically 10μA, helping to minimize power consumption in standby mode.

  7. Is the MIC94031YM4-TR available in a small package size?

    • Yes, the MIC94031YM4-TR is available in a tiny 4-pin 1.2mm x 1.6mm Thin SOT-23 package, making it suitable for space-constrained designs.

  8. Can the MIC94031YM4-TR be used for reverse polarity protection?

    • Yes, the MIC94031YM4-TR can be used for reverse polarity protection in technical solutions, safeguarding the circuitry from damage.

  9. Does the MIC94031YM4-TR have an enable pin for controlling the load switch?

    • Yes, the MIC94031YM4-TR features an enable pin, allowing for convenient control of the load switch operation.

  10. Are there any application notes or reference designs available for using the MIC94031YM4-TR?

    • Yes, Microchip provides comprehensive application notes and reference designs to assist in the effective utilization of the MIC94031YM4-TR in various technical solutions.