PIC16C65A-10I/PQ

Product Overview

Category

The PIC16C65A-10I/PQ belongs to the category of microcontrollers.

Use

This microcontroller is widely used in various electronic devices and systems for controlling and processing data.

Characteristics

• High-performance 8-bit CPU
• Flash-based program memory
• Low power consumption
• Wide operating voltage range
• Integrated peripherals for enhanced functionality

Package

The PIC16C65A-10I/PQ is available in a PQFP package, which stands for Plastic Quad Flat Package. This package provides a compact and reliable housing for the microcontroller.

Essence

The essence of the PIC16C65A-10I/PQ lies in its ability to efficiently execute instructions and perform tasks in embedded systems.

Packaging/Quantity

The PIC16C65A-10I/PQ is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of microcontrollers. The exact quantity may vary depending on the supplier.

Specifications

• Architecture: 8-bit
• Program Memory Size: 7KB
• RAM Size: 368 bytes
• Number of I/O Pins: 22
• Operating Voltage Range: 2.0V to 5.5V
• Maximum Clock Frequency: 20 MHz
• Data Bus Width: 8 bits
• Timers: 3
• Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The PIC16C65A-10I/PQ has a total of 44 pins. Here is a detailed pin configuration:

1. VDD - Power supply voltage
2. RA0 - General-purpose I/O pin
3. RA1 - General-purpose I/O pin
4. RA2 - General-purpose I/O pin
5. RA3 - General-purpose I/O pin
6. RA4 - General-purpose I/O pin
7. RA5 - General-purpose I/O pin
8. MCLR/VPP - Master Clear input or programming voltage supply
9. OSC1/CLKIN - Oscillator input
10. OSC2/CLKOUT - Oscillator output
11. RC0 - General-purpose I/O pin
12. RC1 - General-purpose I/O pin
13. RC2 - General-purpose I/O pin
14. RC3 - General-purpose I/O pin
15. RC4 - General-purpose I/O pin
16. RC5 - General-purpose I/O pin
17. VSS - Ground

(Continued...)

Functional Features

The PIC16C65A-10I/PQ offers several functional features that enhance its performance and versatility:

1. Flash Program Memory: The microcontroller's program memory is based on flash technology, allowing for easy reprogramming and flexibility in application development.

2. Integrated Peripherals: The PIC16C65A-10I/PQ incorporates various peripherals such as timers, an analog-to-digital converter (ADC), and general-purpose I/O pins. These peripherals enable the microcontroller to interface with external devices and perform complex tasks.

3. Low Power Consumption: The microcontroller is designed to operate efficiently with low power consumption, making it suitable for battery-powered applications.

4. Wide Operating Voltage Range: With a wide operating voltage range of 2.0V to 5.5V, the PIC16C65A-10I/PQ can be used in diverse electronic systems without requiring additional voltage regulation circuitry.

Advantages and Disadvantages

Advantages

• High-performance CPU for efficient data processing
• Flash-based program memory allows for easy reprogramming
• Integrated peripherals enhance functionality and reduce external component count
• Low power consumption extends battery life in portable applications
• Wide operating voltage range provides flexibility in system design

Disadvantages

• Limited program memory size compared to some other microcontrollers
• Relatively small amount of RAM may restrict the complexity of applications
• Lack of built-in communication interfaces may require additional components for certain applications

Working Principles

The PIC16C65A-10I/PQ operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with peripherals and I/O pins, and performs data processing tasks according to the program logic.

The microcontroller's CPU fetches instructions from the program memory, decodes them, and executes the corresponding operations. It can read and write data to the RAM, interact with external devices through the I/O pins, and utilize the integrated peripherals for various functions.

Detailed Application Field Plans

The PIC16C65A-10I/PQ finds application in a wide range of electronic systems, including but not limited to:

1. Industrial Control Systems: The microcontroller can be used in industrial automation systems for controlling machinery, monitoring sensors, and managing