Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PIC16F723AT-I/MV
Ver Detalle Hojas de datos

PIC16F723AT-I/MV

Introduction

The PIC16F723AT-I/MV is a microcontroller belonging to the PIC16F family, which is manufactured by Microchip Technology. This microcontroller is widely used in various electronic applications due to its versatile features and capabilities.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded control applications
  • Characteristics: Low power consumption, high performance, versatile I/O capabilities
  • Package: 28-pin QFN
  • Essence: Integration of CPU, memory, and peripherals on a single chip
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • CPU: 8-bit
  • Clock Speed: Up to 32 MHz
  • Program Memory: 7 KB Flash
  • RAM: 256 Bytes
  • I/O Pins: 22
  • Timers: 3
  • Communication Interfaces: SPI, I2C, UART

Detailed Pin Configuration

The PIC16F723AT-I/MV features a 28-pin QFN package with specific pin assignments for power, I/O, communication, and other functions. The detailed pin configuration can be found in the datasheet provided by Microchip Technology.

Functional Features

  • Analog-to-Digital Converter (ADC): Allows for analog signal measurement and conversion
  • PWM Module: Enables precise control of pulse-width modulation signals
  • Comparator Module: Supports analog signal comparison for decision-making processes
  • Interrupt Controller: Facilitates efficient handling of external events and interrupts

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High-performance 8-bit CPU
  • Versatile I/O capabilities
  • Integrated peripherals reduce external component count

Disadvantages

  • Limited program memory compared to higher-end microcontrollers
  • Limited RAM for data storage and manipulation

Working Principles

The PIC16F723AT-I/MV operates based on the Von Neumann architecture, where program instructions and data share the same memory space. It executes instructions fetched from the program memory and interacts with external devices through its I/O pins and communication interfaces.

Detailed Application Field Plans

The PIC16F723AT-I/MV finds extensive use in various embedded control applications, including: - Home automation systems - Industrial automation - Consumer electronics - Automotive control systems

Detailed and Complete Alternative Models

  • PIC16F722A-I/SP
  • PIC16F724-I/P
  • PIC16F726-I/SP
  • PIC16F727-I/PT

These alternative models offer varying combinations of features and specifications, providing flexibility for different application requirements.

In conclusion, the PIC16F723AT-I/MV microcontroller offers a balance of performance, power efficiency, and versatility, making it suitable for a wide range of embedded control applications.

Word Count: 410

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PIC16F723AT-I/MV en soluciones técnicas

  1. What is the maximum operating frequency of PIC16F723AT-I/MV?
    - The maximum operating frequency of PIC16F723AT-I/MV is 20 MHz.

  2. Can PIC16F723AT-I/MV be used in battery-powered applications?
    - Yes, PIC16F723AT-I/MV can be used in battery-powered applications due to its low power consumption.

  3. What are the available communication interfaces on PIC16F723AT-I/MV?
    - PIC16F723AT-I/MV features SPI, I2C, and UART communication interfaces.

  4. Is it possible to program PIC16F723AT-I/MV using C language?
    - Yes, PIC16F723AT-I/MV can be programmed using C language with the appropriate compiler.

  5. What are the available analog-to-digital converter (ADC) channels on PIC16F723AT-I/MV?
    - PIC16F723AT-I/MV has 10-bit ADC with up to 8 channels.

  6. Can PIC16F723AT-I/MV be used in industrial control applications?
    - Yes, PIC16F723AT-I/MV is suitable for industrial control applications due to its robust features and peripherals.

  7. What is the operating voltage range of PIC16F723AT-I/MV?
    - The operating voltage range of PIC16F723AT-I/MV is 2.3V to 5.5V.

  8. Does PIC16F723AT-I/MV have built-in timers and counters?
    - Yes, PIC16F723AT-I/MV includes multiple timers and counters for various timing and control applications.

  9. Is there a development board available for PIC16F723AT-I/MV?
    - Yes, there are development boards specifically designed for PIC16F723AT-I/MV to aid in prototyping and testing.

  10. Can PIC16F723AT-I/MV be used in automotive electronics applications?
    - Yes, PIC16F723AT-I/MV can be utilized in automotive electronics applications, provided it meets the necessary environmental and operational requirements.