Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PIC16F767-I/ML
Ver Detalle Hojas de datos

PIC16F767-I/ML

Product Overview

Category

The PIC16F767-I/ML belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 8-bit RISC architecture
  • Wide operating voltage range: 2.3V to 5.5V
  • Flash program memory with self-read/write capability
  • Enhanced EEPROM data memory
  • Low power consumption
  • Multiple communication interfaces (UART, SPI, I2C)
  • Analog-to-Digital Converter (ADC) module
  • Timers and PWM modules for precise timing control
  • Various interrupt sources for event-driven programming

Package

The PIC16F767-I/ML is available in a small form factor package known as QFN (Quad Flat No-Lead). This package offers a compact size and excellent thermal performance.

Essence

The essence of the PIC16F767-I/ML lies in its ability to provide a cost-effective solution for embedded control applications. It combines high-performance processing capabilities with low power consumption, making it suitable for a wide range of electronic devices.

Packaging/Quantity

The PIC16F767-I/ML is typically sold in reels or tubes, containing a specific quantity of microcontrollers per package. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • CPU Speed: Up to 32 MHz
  • Program Memory Size: 14 KB
  • RAM Size: 368 bytes
  • Number of I/O Pins: 35
  • ADC Resolution: 10-bit
  • Operating Temperature Range: -40°C to +125°C
  • Supply Voltage Range: 2.3V to 5.5V

Detailed Pin Configuration

The PIC16F767-I/ML features a total of 35 I/O pins, each serving a specific purpose. The pin configuration is as follows:

  1. RA0 - Analog Input/Output
  2. RA1 - Analog Input/Output
  3. RA2 - Analog Input/Output
  4. RA3 - Analog Input/Output
  5. RA4 - Analog Input/Output
  6. RA5 - Analog Input/Output
  7. RE0 - Digital Input/Output
  8. RE1 - Digital Input/Output
  9. RE2 - Digital Input/Output
  10. RE3 - Digital Input/Output
  11. RE4 - Digital Input/Output
  12. RE5 - Digital Input/Output
  13. RE6 - Digital Input/Output
  14. RE7 - Digital Input/Output
  15. RB0 - Digital Input/Output
  16. RB1 - Digital Input/Output
  17. RB2 - Digital Input/Output
  18. RB3 - Digital Input/Output
  19. RB4 - Digital Input/Output
  20. RB5 - Digital Input/Output
  21. RB6 - Digital Input/Output
  22. RB7 - Digital Input/Output
  23. RB8 - Digital Input/Output
  24. RB9 - Digital Input/Output
  25. RB10 - Digital Input/Output
  26. RB11 - Digital Input/Output
  27. RB12 - Digital Input/Output
  28. RB13 - Digital Input/Output
  29. RB14 - Digital Input/Output
  30. RB15 - Digital Input/Output
  31. VDD - Power Supply
  32. VSS - Ground
  33. OSC1 - Oscillator Input
  34. OSC2 - Oscillator Output
  35. MCLR - Master Clear Input

Functional Features

The PIC16F767-I/ML offers several functional features that enhance its usability and performance in embedded control applications:

  1. High-performance RISC Architecture: The microcontroller's 8-bit RISC architecture enables efficient execution of instructions, resulting in faster processing speeds.

  2. Flash Program Memory: With self-read/write capability, the microcontroller allows for easy and flexible program updates.

  3. Enhanced EEPROM Data Memory: The enhanced EEPROM data memory provides non-volatile storage for critical data, ensuring its retention even during power loss.

  4. Low Power Consumption: The microcontroller is designed to operate efficiently with low power consumption, making it suitable for battery-powered applications.

  5. Communication Interfaces: The multiple communication interfaces (UART, SPI, I2C) enable seamless integration with other devices, facilitating data exchange and control.

  6. Analog-to-Digital Converter (ADC) Module: The built-in ADC module allows for accurate conversion of analog signals into digital values, expanding the microcontroller's capabilities in sensor-based applications.

  7. Timers and PWM Modules: The timers and Pulse Width Modulation (PWM) modules provide precise timing control, enabling the microcontroller to generate accurate time intervals and control motor speed or LED brightness.

  8. **Interrupt

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PIC16F767-I/ML en soluciones técnicas

  1. What is the maximum clock frequency of PIC16F767-I/ML?
    - The maximum clock frequency of PIC16F767-I/ML is 32 MHz.

  2. How many I/O pins does PIC16F767-I/ML have?
    - PIC16F767-I/ML has 35 I/O pins.

  3. What is the operating voltage range for PIC16F767-I/ML?
    - The operating voltage range for PIC16F767-I/ML is 2.3V to 5.5V.

  4. Can PIC16F767-I/ML be used for analog signal processing?
    - Yes, PIC16F767-I/ML features analog-to-digital converters and analog comparators for analog signal processing.

  5. Does PIC16F767-I/ML support communication protocols like SPI and I2C?
    - Yes, PIC16F767-I/ML supports SPI and I2C communication protocols.

  6. What programming language can be used to program PIC16F767-I/ML?
    - PIC16F767-I/ML can be programmed using assembly language or high-level languages like C.

  7. Is there a built-in oscillator in PIC16F767-I/ML?
    - Yes, PIC16F767-I/ML has a built-in oscillator.

  8. Can PIC16F767-I/ML be used in battery-powered applications?
    - Yes, PIC16F767-I/ML's low operating voltage range makes it suitable for battery-powered applications.

  9. What are the available memory options for program storage in PIC16F767-I/ML?
    - PIC16F767-I/ML offers flash memory for program storage.

  10. Are there any development tools available for PIC16F767-I/ML?
    - Yes, there are various development tools and IDEs available for programming and debugging PIC16F767-I/ML-based applications.