Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PIC16LF877-04I/P
Ver Detalle Hojas de datos

PIC16LF877-04I/P

Product Overview

Category

The PIC16LF877-04I/P belongs to the category of microcontrollers.

Use

This microcontroller is widely used in various electronic devices and systems for controlling and processing data.

Characteristics

  • Low power consumption
  • High performance
  • Enhanced features for embedded applications
  • Wide operating voltage range
  • Large program memory capacity
  • Flexible input/output options

Package

The PIC16LF877-04I/P is available in a 40-pin PDIP (Plastic Dual In-line Package) package.

Essence

The essence of the PIC16LF877-04I/P lies in its ability to provide efficient control and processing capabilities in a compact and versatile package.

Packaging/Quantity

The PIC16LF877-04I/P is typically packaged in reels or tubes, with quantities varying depending on the supplier and customer requirements.

Specifications

  • Operating Voltage: 2.0V to 5.5V
  • CPU Speed: Up to 20 MHz
  • Program Memory Size: 14 KB
  • RAM Size: 368 bytes
  • Number of I/O Pins: 33
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution
  • Timers: 3 timers/counters
  • Communication Interfaces: USART, SPI, I2C

Detailed Pin Configuration

The PIC16LF877-04I/P has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. RB0/INT - General-purpose I/O pin / External interrupt input
  18. RB1 - General-purpose I/O pin
  19. RB2 - General-purpose I/O pin
  20. RB3 - General-purpose I/O pin
  21. RB4 - General-purpose I/O pin
  22. RB5 - General-purpose I/O pin
  23. RB6 - General-purpose I/O pin
  24. RB7 - General-purpose I/O pin
  25. RB8 - General-purpose I/O pin
  26. RB9 - General-purpose I/O pin
  27. RB10 - General-purpose I/O pin
  28. RB11 - General-purpose I/O pin
  29. RB12 - General-purpose I/O pin
  30. RB13 - General-purpose I/O pin
  31. RB14 - General-purpose I/O pin
  32. RB15 - General-purpose I/O pin
  33. VDD - Power supply voltage
  34. VSS - Ground
  35. VREF- - Reference voltage for ADC
  36. VREF+ - Reference voltage for ADC
  37. AN0 - Analog input channel 0
  38. AN1 - Analog input channel 1
  39. AN2 - Analog input channel 2
  40. AN3 - Analog input channel 3

Functional Features

The PIC16LF877-04I/P offers a range of functional features that make it suitable for various applications. Some of the key features include:

  • High-speed processing capabilities
  • Multiple communication interfaces for data exchange
  • Analog-to-Digital Converter (ADC) for precise analog signal measurements
  • Timers/counters for accurate timing and event control
  • Flexible input/output options for interfacing with external devices
  • Low power consumption for energy-efficient designs

Advantages and Disadvantages

Advantages

  • Versatile and flexible microcontroller suitable for a wide range of applications
  • Efficient processing capabilities with high-speed performance
  • Low power consumption for energy-efficient designs
  • Ample program memory capacity for complex applications
  • Enhanced features for embedded systems

Disadvantages

  • Limited RAM size may restrict the complexity of certain applications
  • Availability and pricing may vary depending on the supplier and region
  • Steeper learning curve for beginners due to the advanced features and functionalities

Working Principles

The PIC16LF877-04I/P operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its program memory, performs calculations, controls input/output

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PIC16LF877-04I/P en soluciones técnicas

  1. What is the operating voltage range of PIC16LF877-04I/P?
    - The operating voltage range of PIC16LF877-04I/P is 2.0V to 5.5V.

  2. What is the maximum frequency at which PIC16LF877-04I/P can operate?
    - PIC16LF877-04I/P can operate at a maximum frequency of 20 MHz.

  3. Can PIC16LF877-04I/P be used for battery-powered applications?
    - Yes, PIC16LF877-04I/P is suitable for battery-powered applications due to its low power consumption.

  4. Does PIC16LF877-04I/P have built-in analog-to-digital conversion (ADC) capability?
    - Yes, PIC16LF877-04I/P features a 10-bit ADC module.

  5. What communication interfaces are supported by PIC16LF877-04I/P?
    - PIC16LF877-04I/P supports USART, SPI, and I2C communication interfaces.

  6. Is PIC16LF877-04I/P suitable for motor control applications?
    - Yes, PIC16LF877-04I/P can be used for motor control applications with appropriate interfacing circuitry.

  7. Can PIC16LF877-04I/P be programmed using C language?
    - Yes, PIC16LF877-04I/P can be programmed using C language with the appropriate compiler.

  8. What is the maximum number of I/O pins available on PIC16LF877-04I/P?
    - PIC16LF877-04I/P provides 33 I/O pins for versatile connectivity.

  9. Does PIC16LF877-04I/P have internal EEPROM memory?
    - Yes, PIC16LF877-04I/P includes 256 bytes of internal EEPROM memory.

  10. Can PIC16LF877-04I/P be used in industrial control systems?
    - Yes, PIC16LF877-04I/P is suitable for use in industrial control systems due to its robust features and reliability.