Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PIC24FJ128GB202T-I/MM
Ver Detalle Hojas de datos

PIC24FJ128GB202T-I/MM

Introduction

The PIC24FJ128GB202T-I/MM belongs to the category of microcontrollers and is widely used in various electronic applications. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded control in electronic devices
  • Characteristics: Low power consumption, high performance, integrated peripherals
  • Package: 64-pin TQFP
  • Essence: Advanced microcontroller with enhanced features
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Architecture: 16-bit
  • Flash Memory: 128 KB
  • RAM: 8 KB
  • Operating Voltage: 2.2V to 3.6V
  • Speed: Up to 16 MIPS
  • Communication Interfaces: UART, SPI, I2C
  • Analog Inputs: 12-bit ADC

Detailed Pin Configuration

The PIC24FJ128GB202T-I/MM features a 64-pin TQFP package with specific pin configurations for various functions. Refer to the datasheet for the detailed pinout diagram.

Functional Features

  • Integrated Peripherals: Timers, PWM modules, Analog Comparators
  • High-Speed ADC: 12-bit resolution for accurate analog measurements
  • Low-Power Operation: Sleep modes for power conservation
  • Flexible Communication Interfaces: UART, SPI, I2C for versatile connectivity

Advantages and Disadvantages

Advantages

  • High-performance 16-bit architecture
  • Rich set of integrated peripherals
  • Low power consumption for energy-efficient designs

Disadvantages

  • Limited RAM compared to some competing models
  • Higher cost compared to lower-end microcontrollers

Working Principles

The PIC24FJ128GB202T-I/MM operates based on the Harvard architecture, where program and data memories are separate. It executes instructions at high speed and interfaces with external components through its communication interfaces and I/O pins.

Detailed Application Field Plans

This microcontroller is suitable for a wide range of applications including: - Industrial automation - Consumer electronics - Medical devices - Automotive systems

Detailed and Complete Alternative Models

  • PIC24FJ64GB002T-I/MM: Lower memory and pin count variant
  • PIC24FJ256GB406T-I/MM: Higher memory and advanced peripheral integration

In conclusion, the PIC24FJ128GB202T-I/MM is a versatile microcontroller with advanced features suitable for various embedded control applications.

[Word Count: 398]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PIC24FJ128GB202T-I/MM en soluciones técnicas

  1. What is the maximum operating frequency of PIC24FJ128GB202T-I/MM?

    • The maximum operating frequency of PIC24FJ128GB202T-I/MM is 32 MHz.

  2. What are the key features of PIC24FJ128GB202T-I/MM?

    • PIC24FJ128GB202T-I/MM features 128 KB of flash memory, 8 KB of RAM, and various communication interfaces such as UART, SPI, and I2C.

  3. Can PIC24FJ128GB202T-I/MM be used in battery-powered applications?

    • Yes, PIC24FJ128GB202T-I/MM is suitable for battery-powered applications due to its low power consumption and multiple power-saving modes.

  4. What development tools are available for programming PIC24FJ128GB202T-I/MM?

    • Development tools such as MPLAB X IDE and MPLAB XC16 Compiler can be used for programming and debugging PIC24FJ128GB202T-I/MM.

  5. Does PIC24FJ128GB202T-I/MM support analog-to-digital conversion?

    • Yes, PIC24FJ128GB202T-I/MM features a 10-bit analog-to-digital converter with multiple channels.

  6. What are the recommended operating conditions for PIC24FJ128GB202T-I/MM?

    • The recommended operating voltage range for PIC24FJ128GB202T-I/MM is 2.0V to 3.6V, with a typical operating temperature range of -40°C to 85°C.

  7. Is PIC24FJ128GB202T-I/MM suitable for motor control applications?

    • Yes, PIC24FJ128GB202T-I/MM is well-suited for motor control applications due to its high-performance core and peripheral features.

  8. Can PIC24FJ128GB202T-I/MM interface with external memory devices?

    • Yes, PIC24FJ128GB202T-I/MM supports external memory interfaces such as SPI, I2C, and parallel communication for interfacing with external memory devices.

  9. Are there any known limitations or errata for PIC24FJ128GB202T-I/MM?

    • Refer to the device datasheet and errata document for any known limitations or issues related to PIC24FJ128GB202T-I/MM.

  10. What are the available packaging options for PIC24FJ128GB202T-I/MM?

    • PIC24FJ128GB202T-I/MM is available in various package options including QFN, UQFN, and TQFP to suit different application requirements.