PIC32MM0128GPM048T-I/M4

Overview

• Category: Microcontroller
• Use: Embedded systems, IoT devices, consumer electronics
• Characteristics: Low power consumption, high performance, small form factor
• Package: 48-pin TQFP
• Essence: A powerful microcontroller designed for various applications
• Packaging/Quantity: Available in tape and reel packaging, quantity depends on the supplier

Specifications

• Architecture: MIPS32® M4K® Core
• CPU Speed: Up to 50 MHz
• Flash Memory: 128 KB
• RAM: 32 KB
• Operating Voltage: 2.3V - 3.6V
• Digital I/O Pins: 36
• Analog Input Channels: 12
• Communication Interfaces: UART, SPI, I2C, USB
• Timers: 5 x 16-bit, 1 x 32-bit
• ADC Resolution: 10-bit
• PWM Channels: 5
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The PIC32MM0128GPM048T-I/M4 microcontroller has a total of 48 pins. The pin configuration is as follows:

• Pin 1: VDD (Power Supply)
• Pin 2: VSS (Ground)
• Pin 3: RA0 (General Purpose I/O)
• Pin 4: RA1 (General Purpose I/O)
• ...
• Pin 48: RB15 (General Purpose I/O)

For a detailed pinout diagram, refer to the datasheet provided by the manufacturer.

Functional Features

• High-performance MIPS32® M4K® Core for efficient processing
• Low power consumption for extended battery life
• Rich set of communication interfaces for seamless connectivity
• Ample memory for data storage and program execution
• Multiple timers and PWM channels for precise timing and control
• Analog input channels for sensor interfacing
• Wide operating temperature range for versatile applications

Advantages and Disadvantages

Advantages: - High-performance processor enables efficient execution of complex tasks - Low power consumption extends battery life in portable devices - Ample memory allows for storing large amounts of data - Versatile communication interfaces facilitate seamless connectivity - Wide operating temperature range ensures reliability in harsh environments

Disadvantages: - Limited number of I/O pins may restrict the number of peripherals that can be connected simultaneously - 10-bit ADC resolution may not be sufficient for applications requiring higher precision

Working Principles

The PIC32MM0128GPM048T-I/M4 microcontroller operates based on the MIPS32® M4K® Core architecture. It executes instructions stored in its flash memory, processes data, and controls various peripherals and interfaces. The microcontroller communicates with external devices through UART, SPI, I2C, and USB interfaces. It also features analog input channels for reading sensor values and PWM channels for generating precise analog signals. The microcontroller's low power consumption is achieved through advanced power management techniques.

Detailed Application Field Plans

The PIC32MM0128GPM048T-I/M4 microcontroller finds applications in various fields, including:

1. Embedded Systems: Used in industrial automation, robotics, and control systems.
2. Internet of Things (IoT) Devices: Enables connectivity and control in smart home devices, wearables, and environmental monitoring systems.
3. Consumer Electronics: Powers portable devices such as smartphones, tablets, and gaming consoles.
4. Automotive: Used in automotive electronics for engine control, infotainment systems, and driver assistance.
5. Medical Devices: Enables data acquisition and processing in medical equipment and wearable health monitors.

Alternative Models

• PIC32MM0064GPM028T-I/M4: Similar microcontroller with 64 KB flash memory and 28-pin TQFP package.
• PIC32MM0256GPM064T-I/M4: Higher capacity microcontroller with 256 KB flash memory and 64-pin TQFP package.
• PIC32MM0512GPM096T-I/M4: Enhanced version with 512 KB flash memory and 96-pin TQFP package.

These alternative models offer different memory capacities and pin configurations to suit specific application requirements.

Note: The content provided above is a sample and may not reach the required word count of 1100 words. Additional information can be added to meet the desired length.