PIC32MX110F016D-I/TL

Overview

• Category: Microcontroller
• Use: Embedded systems, Internet of Things (IoT) devices, consumer electronics
• Characteristics:
  • High-performance 32-bit microcontroller
  • Low power consumption
  • Integrated peripherals for various applications
• Package: TQFP
• Essence: A versatile microcontroller designed for a wide range of applications
• Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

• Architecture: MIPS32® M4K®
• CPU Speed: Up to 50 MHz
• Flash Memory: 16 KB
• RAM: 4 KB
• Operating Voltage: 2.3V - 3.6V
• Digital I/O Pins: 25
• Analog Input Channels: 5
• Communication Interfaces: UART, SPI, I2C, USB
• Timers: 5 x 16-bit, 1 x 32-bit
• ADC Resolution: 10-bit
• PWM Channels: 5
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The PIC32MX110F016D-I/TL microcontroller has a total of 44 pins. The pin configuration is as follows:

• Pin 1: VDD (Power Supply)
• Pin 2: VSS (Ground)
• Pin 3: OSC1 (Oscillator Input)
• Pin 4: OSC2 (Oscillator Output)
• Pin 5: RA0 (General Purpose I/O)
• Pin 6: RA1 (General Purpose I/O)
• ...
• Pin 44: RB15 (General Purpose I/O)

For a detailed pinout diagram, refer to the datasheet provided by the manufacturer.

Functional Features

• High-performance processing capabilities
• Low power consumption for energy-efficient designs
• Integrated peripherals for various applications (UART, SPI, I2C, USB)
• Flexible digital and analog I/O capabilities
• Multiple timers and PWM channels for precise timing and control

Advantages and Disadvantages

Advantages: - High-performance architecture for demanding applications - Versatile range of integrated peripherals - Low power consumption for energy-efficient designs - Ample digital and analog I/O capabilities

Disadvantages: - Limited flash memory and RAM compared to higher-end microcontrollers - Relatively small number of I/O pins compared to some other models

Working Principles

The PIC32MX110F016D-I/TL microcontroller operates based on the MIPS32® M4K® architecture. It executes instructions stored in its flash memory and utilizes its integrated peripherals to interact with external devices. The microcontroller can be programmed using various development tools and programming languages, allowing developers to create custom firmware to suit their specific application requirements.

Detailed Application Field Plans

The PIC32MX110F016D-I/TL microcontroller is suitable for a wide range of applications, including but not limited to:

1. Embedded systems: Used in industrial automation, robotics, and control systems.
2. Internet of Things (IoT) devices: Enables connectivity and control in smart home devices, wearable technology, and environmental monitoring systems.
3. Consumer electronics: Powers various consumer devices such as gaming consoles, home appliances, and audio/video equipment.

Detailed and Complete Alternative Models

1. PIC32MX120F032D-I/TL: Similar to PIC32MX110F016D-I/TL but with 32 KB flash memory and 8 KB RAM.
2. PIC32MX130F064D-I/TL: Similar to PIC32MX110F016D-I/TL but with 64 KB flash memory and 8 KB RAM.
3. PIC32MX150F128D-I/TL: Similar to PIC32MX110F016D-I/TL but with 128 KB flash memory and 32 KB RAM.

These alternative models offer increased memory capacity and may better suit applications requiring larger code or data storage.

Note: The content provided above is a sample entry and may not reflect the actual specifications, pin configuration, or alternative models of the PIC32MX110F016D-I/TL microcontroller. Please refer to the manufacturer's datasheet for accurate information.