Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PIC32MX230F064D-V/ML
Ver Detalle Hojas de datos

PIC32MX230F064D-V/ML

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, consumer electronics
  • Characteristics:
    • High-performance 32-bit microcontroller
    • Low power consumption
    • Large memory capacity
    • Extensive peripheral integration
  • Package: QFN (Quad Flat No-Lead)
  • Essence: A powerful microcontroller designed for various applications requiring high performance and low power consumption.
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements.

Specifications

  • Architecture: MIPS32® M4K®
  • CPU Speed: Up to 50 MHz
  • Flash Memory: 64 KB
  • RAM: 8 KB
  • Operating Voltage: 2.3V to 3.6V
  • Digital I/O Pins: 35
  • Analog Input Channels: 12
  • Communication Interfaces: UART, SPI, I2C, USB
  • Timers: 5 x 16-bit, 1 x 32-bit
  • ADC Resolution: 10-bit
  • PWM Channels: 5
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC32MX230F064D-V/ML microcontroller has a total of 44 pins. The pin configuration is as follows:

  • Pin 1: VDD (Power Supply)
  • Pin 2: VSS (Ground)
  • Pin 3: RA0 (Analog/Digital I/O)
  • Pin 4: RA1 (Analog/Digital I/O)
  • ...
  • Pin 43: RB13 (Digital I/O)
  • Pin 44: RB14 (Digital I/O)

For the complete pin configuration diagram, please refer to the datasheet.

Functional Features

  • High-performance processing capabilities
  • Low power consumption for energy-efficient designs
  • Ample memory capacity for storing program code and data
  • Integrated peripherals such as UART, SPI, I2C, and USB for seamless communication
  • Multiple timers and PWM channels for precise timing and control
  • 10-bit ADC for analog signal acquisition

Advantages

  • Powerful processing capabilities enable complex applications
  • Low power consumption extends battery life in portable devices
  • Extensive peripheral integration simplifies system design
  • Ample memory capacity allows for larger programs and data storage
  • Wide operating temperature range enables use in harsh environments

Disadvantages

  • Limited flash memory size compared to some other microcontrollers
  • Higher cost compared to lower-end microcontrollers with similar features

Working Principles

The PIC32MX230F064D-V/ML microcontroller operates based on the MIPS32® M4K® architecture. It executes instructions stored in its flash memory, processes data, and communicates with external devices through its integrated peripherals. The microcontroller's clock speed determines the rate at which it performs these operations.

Detailed Application Field Plans

The PIC32MX230F064D-V/ML microcontroller is suitable for a wide range of applications, including: - Embedded systems - Internet of Things (IoT) devices - Consumer electronics - Industrial automation - Medical devices - Automotive systems

Detailed and Complete Alternative Models

  • PIC32MX230F064D-I/ML: Similar specifications but available in an industrial temperature range.
  • PIC32MX230F064D-I/PT: Similar specifications but available in a TQFP package.
  • PIC32MX230F064D-I/PTG: Similar specifications but available in a TQFP package with extended temperature range.

These alternative models offer similar functionality and can be considered based on specific project requirements.

Note: This entry contains 446 words. Please add additional content to meet the required 1100 words.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PIC32MX230F064D-V/ML en soluciones técnicas

  1. What is the maximum operating frequency of PIC32MX230F064D-V/ML?
    - The maximum operating frequency of PIC32MX230F064D-V/ML is 50 MHz.

  2. What are the key features of PIC32MX230F064D-V/ML?
    - Some key features of PIC32MX230F064D-V/ML include 64 KB flash memory, 8 KB RAM, multiple communication interfaces, and a variety of peripherals.

  3. Can PIC32MX230F064D-V/ML be used in industrial control applications?
    - Yes, PIC32MX230F064D-V/ML is suitable for industrial control applications due to its robust features and performance.

  4. Does PIC32MX230F064D-V/ML support USB connectivity?
    - Yes, PIC32MX230F064D-V/ML supports USB connectivity, making it suitable for applications requiring USB interfaces.

  5. What development tools are available for programming PIC32MX230F064D-V/ML?
    - Development tools such as MPLAB X IDE and MPLAB XC32 Compiler support programming and debugging of PIC32MX230F064D-V/ML.

  6. Is PIC32MX230F064D-V/ML suitable for low-power applications?
    - Yes, PIC32MX230F064D-V/ML offers low-power modes and features, making it suitable for battery-powered or energy-efficient applications.

  7. Can PIC32MX230F064D-V/ML be used in motor control applications?
    - Yes, PIC32MX230F064D-V/ML can be used in motor control applications with its integrated peripherals and high-performance capabilities.

  8. What communication interfaces does PIC32MX230F064D-V/ML support?
    - PIC32MX230F064D-V/ML supports interfaces such as SPI, I2C, UART, and CAN, enabling versatile communication options.

  9. Are there any application notes or reference designs available for PIC32MX230F064D-V/ML?
    - Yes, Microchip provides application notes and reference designs to assist in implementing PIC32MX230F064D-V/ML in various technical solutions.

  10. What is the temperature range for operating PIC32MX230F064D-V/ML?
    - PIC32MX230F064D-V/ML has an operating temperature range of -40°C to 85°C, making it suitable for a wide range of environments.