Consulte las especificaciones para obtener detalles del producto.
PIC32MX250F128C-V/TL
Product Overview
Category
The PIC32MX250F128C-V/TL belongs to the category of microcontrollers.
Use
This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.
Characteristics
- High-performance 32-bit RISC CPU
- Flash memory for program storage
- Ample RAM for data storage
- Multiple communication interfaces (UART, SPI, I2C)
- Analog-to-Digital Converter (ADC) for sensor interfacing
- Timers and PWM modules for precise timing control
- Low power consumption
- Wide operating voltage range
Package
The PIC32MX250F128C-V/TL is available in a small form factor package, such as a 28-pin TQFP (Thin Quad Flat Package).
Essence
The essence of this microcontroller lies in its ability to provide a powerful and flexible platform for developing various applications that require advanced control and processing capabilities.
Packaging/Quantity
The PIC32MX250F128C-V/TL is typically sold in reels or trays containing multiple units. The exact quantity may vary depending on the supplier.
Specifications
- Microcontroller Family: PIC32MX
- Model Number: PIC32MX250F128C-V/TL
- CPU Architecture: MIPS32
- CPU Speed: Up to 50 MHz
- Flash Memory: 128 KB
- RAM: 32 KB
- Operating Voltage Range: 2.3V to 3.6V
- Communication Interfaces: UART, SPI, I2C
- Analog-to-Digital Converter (ADC): 10-bit resolution, up to 16 channels
- Timers: Multiple timers with various modes
- PWM Modules: Multiple PWM outputs with configurable frequency and duty cycle
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The PIC32MX250F128C-V/TL has a total of 28 pins. The pin configuration is as follows:
- VDD - Power supply voltage
- VSS - Ground
- RA0 - General-purpose I/O pin
- RA1 - General-purpose I/O pin
- RA2 - General-purpose I/O pin
- RA3 - General-purpose I/O pin
- RA4 - General-purpose I/O pin
- RA5 - General-purpose I/O pin
- MCLR - Master Clear input
- RB0 - General-purpose I/O pin
- RB1 - General-purpose I/O pin
- RB2 - General-purpose I/O pin
- RB3 - General-purpose I/O pin
- RB4 - General-purpose I/O pin
- RB5 - General-purpose I/O pin
- RB6 - General-purpose I/O pin
- RB7 - General-purpose I/O pin
- RB8 - General-purpose I/O pin
- RB9 - General-purpose I/O pin
- RB10 - General-purpose I/O pin
- RB11 - General-purpose I/O pin
- RB12 - General-purpose I/O pin
- RB13 - General-purpose I/O pin
- RB14 - General-purpose I/O pin
- RB15 - General-purpose I/O pin
- VCAP - Capacitor connection for internal voltage regulator
- AVDD - Analog power supply voltage
- AVSS - Analog ground
Functional Features
- High-performance processing capabilities
- Ample memory for program and data storage
- Versatile communication interfaces for data exchange
- Analog-to-Digital Converter for sensor interfacing
- Timers and PWM modules for precise timing control
- Low power consumption for energy-efficient designs
- Wide operating voltage range for compatibility with various power sources
Advantages and Disadvantages
Advantages
- Powerful processing capabilities enable complex applications
- Ample memory allows for storing large programs and data
- Versatile communication interfaces facilitate easy integration with other devices
- Analog-to-Digital Converter simplifies sensor interfacing
- Timers and PWM modules provide precise timing control
- Low power consumption prolongs battery life in portable devices
- Wide operating voltage range ensures compatibility with different power sources
Disadvantages
- Limited number of I/O pins may restrict the connectivity options in some applications
- Relatively higher cost compared to simpler microcontrollers
- Steeper learning curve due to the complexity of the device
Working Principles
The PIC32MX250F128C-V/TL operates based on the principles of a 32-bit RISC (Reduced Instruction Set Computer) CPU architecture. It executes instructions stored in its flash memory, processes data using its internal registers and RAM, and communicates with external devices through its various interfaces. The microcontroller's working principles involve fetching,
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PIC32MX250F128C-V/TL en soluciones técnicas
What is the maximum operating frequency of PIC32MX250F128C-V/TL?
- The maximum operating frequency of PIC32MX250F128C-V/TL is 50 MHz.
What are the key features of PIC32MX250F128C-V/TL?
- PIC32MX250F128C-V/TL features 128 KB Flash, 32 KB RAM, USB, and multiple communication interfaces.
Can PIC32MX250F128C-V/TL be used for real-time control applications?
- Yes, PIC32MX250F128C-V/TL is suitable for real-time control applications due to its high performance and integrated peripherals.
What development tools are available for programming PIC32MX250F128C-V/TL?
- Development tools such as MPLAB X IDE and MPLAB XC32 Compiler can be used for programming PIC32MX250F128C-V/TL.
Does PIC32MX250F128C-V/TL support external memory expansion?
- Yes, PIC32MX250F128C-V/TL supports external memory expansion through its memory interface controller.
What communication interfaces are supported by PIC32MX250F128C-V/TL?
- PIC32MX250F128C-V/TL supports SPI, I2C, UART, and USB communication interfaces.
Is PIC32MX250F128C-V/TL suitable for low-power applications?
- Yes, PIC32MX250F128C-V/TL offers low-power modes and features to support low-power applications.
Can PIC32MX250F128C-V/TL be used in industrial automation systems?
- Yes, PIC32MX250F128C-V/TL is suitable for industrial automation systems due to its robust features and performance.
What are the security features available in PIC32MX250F128C-V/TL?
- PIC32MX250F128C-V/TL offers security features such as code protection and secure boot capabilities.
Are there any application notes or reference designs available for PIC32MX250F128C-V/TL?
- Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC32MX250F128C-V/TL in various technical solutions.