The SST39SF010A-45-4I-NHE-T belongs to the category of non-volatile memory devices.
This product is primarily used for data storage in various electronic devices such as microcontrollers, embedded systems, and consumer electronics.
The SST39SF010A-45-4I-NHE-T is available in a standard 32-pin plastic DIP (Dual In-line Package) or TSOP (Thin Small Outline Package).
The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic devices, ensuring data integrity even during power loss or system shutdown.
The SST39SF010A-45-4I-NHE-T is typically packaged in reels or tubes, with quantities varying based on customer requirements.
The SST39SF010A-45-4I-NHE-T has a total of 32 pins, each serving a specific purpose. The pin configuration is as follows:
The SST39SF010A-45-4I-NHE-T offers the following functional features:
The SST39SF010A-45-4I-NHE-T utilizes Flash memory technology to store data. It consists of floating-gate transistors that can retain charge even when power is removed. The device uses a combination of address inputs, control signals, and data lines to read from or write to specific memory locations. When data is written, the charge on the floating gate is modified, altering the transistor's behavior and storing the desired information.
The SST39SF010A-45-4I-NHE-T finds applications in various fields, including:
These alternative models offer similar storage capacities and functionalities to the SST39SF010A-45-4I-NHE-T,
Sure! Here are 10 common questions and answers related to the application of SST39SF010A-45-4I-NHE-T in technical solutions:
Q: What is the purpose of the SST39SF010A-45-4I-NHE-T? A: The SST39SF010A-45-4I-NHE-T is a flash memory device used for storing data in various electronic applications.
Q: What is the storage capacity of the SST39SF010A-45-4I-NHE-T? A: The SST39SF010A-45-4I-NHE-T has a storage capacity of 1 megabit (128 kilobytes).
Q: What is the operating voltage range for this device? A: The SST39SF010A-45-4I-NHE-T operates within a voltage range of 4.5V to 5.5V.
Q: Can the SST39SF010A-45-4I-NHE-T be used in automotive applications? A: Yes, the SST39SF010A-45-4I-NHE-T is suitable for automotive applications due to its wide temperature range and reliability.
Q: Is the SST39SF010A-45-4I-NHE-T compatible with microcontrollers? A: Yes, the SST39SF010A-45-4I-NHE-T can be easily interfaced with microcontrollers using standard protocols.
Q: Does this device support in-system programming (ISP)? A: Yes, the SST39SF010A-45-4I-NHE-T supports in-system programming, allowing for easy firmware updates.
Q: What is the access time of the SST39SF010A-45-4I-NHE-T? A: The access time of this device is 45 nanoseconds, making it suitable for high-speed applications.
Q: Can the SST39SF010A-45-4I-NHE-T be used in battery-powered devices? A: Yes, the low power consumption of this device makes it suitable for battery-powered applications.
Q: Is the SST39SF010A-45-4I-NHE-T compatible with both 3.3V and 5V logic levels? A: No, the SST39SF010A-45-4I-NHE-T operates at 5V logic levels only.
Q: What is the package type of the SST39SF010A-45-4I-NHE-T? A: The SST39SF010A-45-4I-NHE-T comes in a 32-pin plastic DIP (Dual In-line Package) format.
Please note that these answers are based on general information about the SST39SF010A-45-4I-NHE-T and may vary depending on specific application requirements.