TC1016-2.8VCTTR

Product Overview

Category

TC1016-2.8VCTTR belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

• Package: TC1016-2.8VCTTR comes in a compact surface-mount package.
• Essence: The essence of this product lies in its ability to provide a stable output voltage.
• Packaging/Quantity: It is typically packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

The specifications of TC1016-2.8VCTTR are as follows:

• Input Voltage Range: 2.5V to 6.0V
• Output Voltage: 2.8V ±2%
• Output Current: Up to 100mA
• Dropout Voltage: 150mV (typical)
• Quiescent Current: 50µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

TC1016-2.8VCTTR has the following pin configuration:

1. VIN (Input Voltage)
2. GND (Ground)
3. VOUT (Output Voltage)

Functional Features

The functional features of TC1016-2.8VCTTR include:

• Low dropout voltage: Enables efficient regulation even when the input voltage is close to the desired output voltage.
• Low quiescent current: Ensures minimal power consumption during standby or idle conditions.
• Overcurrent and thermal protection: Safeguards the regulator and the connected circuitry from damage.
• Fast transient response: Allows for quick stabilization of the output voltage after load changes.

Advantages and Disadvantages

Advantages

• Compact size and surface-mount package make it suitable for space-constrained applications.
• Wide input voltage range allows for flexibility in various electronic systems.
• Low dropout voltage ensures efficient power conversion.
• Overcurrent and thermal protection enhance the reliability of the regulator.

Disadvantages

• Limited output current capacity may restrict its use in high-power applications.
• The fixed output voltage may not be suitable for all voltage requirements.

Working Principles

TC1016-2.8VCTTR operates based on the principle of a linear voltage regulator. It utilizes a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This regulation is achieved by comparing the output voltage with a reference voltage and adjusting the pass transistor accordingly.

Detailed Application Field Plans

TC1016-2.8VCTTR finds applications in various fields, including:

1. Battery-powered devices: It can be used to regulate the voltage in portable electronics such as smartphones, tablets, and wearable devices.
2. Automotive electronics: It is suitable for voltage regulation in automotive systems, including infotainment systems, sensors, and control modules.
3. Industrial automation: TC1016-2.8VCTTR can be employed in industrial control systems, PLCs (Programmable Logic Controllers), and motor drives.
4. IoT (Internet of Things): It is useful in IoT devices that require stable voltage supply, such as smart home appliances, environmental sensors, and wireless communication modules.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to TC1016-2.8VCTTR are:

1. LM1117-2.8: A popular voltage regulator with a fixed 2.8V output voltage.
2. MCP1700-2.8: Another voltage regulator with a low dropout voltage and a fixed 2.8V output.
3. TS2937-2.8: A compact voltage regulator designed for low-power applications, providing a fixed 2.8V output.

These alternative models can be considered based on specific requirements and availability.

In conclusion, TC1016-2.8VCTTR is a voltage regulator that offers stable voltage regulation in electronic circuits. Its compact size, low dropout voltage, and wide input voltage range make it suitable for various applications. However, its limited output current capacity and fixed output voltage should be taken into consideration when selecting the appropriate voltage regulator for a specific application.