Consulte las especificaciones para obtener detalles del producto.
TC1073-3.3VCH713
Product Overview
Category
TC1073-3.3VCH713 belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- Voltage Output: 3.3V
- Package Type: CH713
- Essence: Voltage regulator
- Packaging/Quantity: Varies based on supplier
Specifications
The specifications of TC1073-3.3VCH713 are as follows:
- Input Voltage Range: 4.5V to 10V
- Output Voltage: 3.3V ±2%
- Maximum Output Current: 250mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 50µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The pin configuration of TC1073-3.3VCH713 is as follows:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Low dropout voltage
- Low quiescent current
- Overcurrent and thermal protection
- Short-circuit protection
- Reverse polarity protection
Advantages and Disadvantages
Advantages
- Stable output voltage
- Wide input voltage range
- Low power consumption
- Protection features ensure device safety
Disadvantages
- Limited maximum output current
- Dropout voltage may affect efficiency in low input voltage scenarios
Working Principles
TC1073-3.3VCH713 operates based on a linear voltage regulation principle. It regulates the input voltage to a stable 3.3V output voltage by dissipating excess energy as heat.
Detailed Application Field Plans
TC1073-3.3VCH713 finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to TC1073-3.3VCH713 are: - LM1117-3.3V - MCP1700-3302E/TO - AP2112K-3.3TRG1
These models offer similar voltage regulation capabilities and can be used as substitutes based on specific requirements.
In conclusion, TC1073-3.3VCH713 is a voltage regulator with a stable 3.3V output voltage, low power consumption, and various protection features. It finds applications in battery-powered devices, portable electronics, IoT devices, and embedded systems. Alternative models such as LM1117-3.3V, MCP1700-3302E/TO, and AP2112K-3.3TRG1 can also be considered for similar voltage regulation needs.
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TC1073-3.3VCH713 en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of TC1073-3.3VCH713 in technical solutions:
Q: What is TC1073-3.3VCH713? A: TC1073-3.3VCH713 is a specific voltage regulator IC (integrated circuit) that provides a regulated output voltage of 3.3V.
Q: What are the typical applications of TC1073-3.3VCH713? A: TC1073-3.3VCH713 is commonly used in various electronic devices and systems where a stable 3.3V power supply is required, such as microcontrollers, sensors, and low-power digital circuits.
Q: How does TC1073-3.3VCH713 regulate the output voltage? A: TC1073-3.3VCH713 uses a feedback mechanism to maintain a constant output voltage despite changes in input voltage or load conditions.
Q: What is the input voltage range for TC1073-3.3VCH713? A: The input voltage range for TC1073-3.3VCH713 typically spans from 2.5V to 6.0V.
Q: Can TC1073-3.3VCH713 handle high current loads? A: No, TC1073-3.3VCH713 is designed for low to moderate current loads. It has a maximum output current rating, usually around 250mA.
Q: Is TC1073-3.3VCH713 suitable for battery-powered applications? A: Yes, TC1073-3.3VCH713 is often used in battery-powered devices due to its low quiescent current and efficient power conversion.
Q: Does TC1073-3.3VCH713 require any external components for operation? A: Yes, TC1073-3.3VCH713 typically requires a few external components like input/output capacitors and resistors to set the output voltage.
Q: Can TC1073-3.3VCH713 tolerate input voltage fluctuations? A: Yes, TC1073-3.3VCH713 has built-in protection features that allow it to withstand certain levels of input voltage variations without affecting the output voltage significantly.
Q: What is the efficiency of TC1073-3.3VCH713? A: The efficiency of TC1073-3.3VCH713 depends on the input-output voltage differential and load conditions but is generally around 80-90%.
Q: Are there any specific layout considerations for using TC1073-3.3VCH713? A: Yes, proper PCB layout techniques should be followed to minimize noise, ensure good thermal dissipation, and maintain stable operation of TC1073-3.3VCH713.