Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TC1263-5.0VOATR
Ver Detalle Hojas de datos

TC1263-5.0VOATR

Product Overview

Category

TC1263-5.0VOATR belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The TC1263-5.0VOATR comes in a compact surface-mount package.
  • Essence: It is a low-dropout linear voltage regulator.
  • Packaging/Quantity: The product is typically packaged in reels and available in large quantities.

Specifications

The TC1263-5.0VOATR has the following specifications:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 5.0V
  • Dropout Voltage: 300mV (typical)
  • Maximum Output Current: 500mA
  • Quiescent Current: 75µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TC1263-5.0VOATR has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

The functional features of TC1263-5.0VOATR include:

  • Low dropout voltage, ensuring efficient regulation even with small input-output differentials.
  • Low quiescent current, reducing power consumption in standby mode.
  • Overcurrent and thermal protection, safeguarding the device and the connected circuitry.

Advantages and Disadvantages

Advantages: - Compact size and surface-mount package make it suitable for space-constrained applications. - Wide input voltage range allows compatibility with various power sources. - Excellent line and load regulation characteristics ensure stable output voltage.

Disadvantages: - Limited maximum output current may not be sufficient for high-power applications. - Higher dropout voltage compared to some other voltage regulators in the market.

Working Principles

The TC1263-5.0VOATR operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This ensures that the output voltage remains constant even when the input voltage fluctuates.

Detailed Application Field Plans

The TC1263-5.0VOATR finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to TC1263-5.0VOATR include: - LM1117-5.0 - LT1763-5.0 - MCP1700-500

These models offer similar functionality and can be considered as alternatives depending on specific requirements.

In conclusion, the TC1263-5.0VOATR is a compact and efficient voltage regulator suitable for a wide range of electronic applications. Its low dropout voltage, low quiescent current, and built-in protection features make it a reliable choice for voltage regulation needs.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TC1263-5.0VOATR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TC1263-5.0VOATR in technical solutions:

  1. Q: What is TC1263-5.0VOATR? A: TC1263-5.0VOATR is a technical specification that defines the requirements for Voltage-Controlled Attenuators (VOATRs) used in various electronic applications.

  2. Q: What is the purpose of TC1263-5.0VOATR? A: The purpose of TC1263-5.0VOATR is to ensure the performance, reliability, and compatibility of VOATRs in technical solutions.

  3. Q: How can TC1263-5.0VOATR be applied in technical solutions? A: TC1263-5.0VOATR can be applied by incorporating VOATRs into electronic circuits or systems where voltage-controlled attenuation is required.

  4. Q: What are the key specifications covered by TC1263-5.0VOATR? A: TC1263-5.0VOATR covers specifications such as attenuation range, linearity, insertion loss, return loss, power handling capability, control voltage range, and temperature range.

  5. Q: Are there any specific design considerations when using TC1263-5.0VOATR? A: Yes, designers should consider factors like impedance matching, signal integrity, power supply requirements, and thermal management when incorporating TC1263-5.0VOATR in their designs.

  6. Q: Can TC1263-5.0VOATR be used in high-frequency applications? A: Yes, TC1263-5.0VOATR can be designed to operate at high frequencies, but it's important to ensure that the specifications meet the requirements of the specific application.

  7. Q: Are there any limitations or restrictions when using TC1263-5.0VOATR? A: Some limitations may include frequency limitations, power handling limitations, and temperature restrictions specified in the technical specification.

  8. Q: How can I ensure compliance with TC1263-5.0VOATR? A: Compliance with TC1263-5.0VOATR can be ensured by following the guidelines and requirements outlined in the technical specification during the design, manufacturing, and testing processes.

  9. Q: Are there any alternative specifications to TC1263-5.0VOATR? A: Yes, there may be alternative specifications available for voltage-controlled attenuators, but TC1263-5.0VOATR is a widely recognized standard that provides a common reference for compatibility and performance.

  10. Q: Where can I find more information about TC1263-5.0VOATR? A: More information about TC1263-5.0VOATR can be found in the official documentation provided by the relevant standards organization or by consulting industry resources and experts familiar with the specification.

Please note that the answers provided here are general and may vary depending on the specific requirements and context of the technical solution.