Consulte las especificaciones para obtener detalles del producto.
TC1264-2.5VDBTR
Product Overview
Category
TC1264-2.5VDBTR belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- Voltage Output: 2.5V
- Package Type: DBT (SOT-23)
- Essence: Linear voltage regulator
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
The TC1264-2.5VDBTR has the following specifications:
- Input Voltage Range: 2.7V to 6.0V
- Dropout Voltage: 350mV at 100mA
- Output Current: 100mA
- Line Regulation: ±0.5%
- Load Regulation: ±1%
- Quiescent Current: 50µA
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The TC1264-2.5VDBTR has three pins:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
The key functional features of TC1264-2.5VDBTR include:
- Low dropout voltage
- Low quiescent current
- Overcurrent and thermal protection
- Short-circuit protection
- Reverse polarity protection
Advantages and Disadvantages
Advantages
- Stable and accurate output voltage
- Wide input voltage range
- Low power consumption
- Compact package size
- Protection features ensure device safety
Disadvantages
- Limited output current capacity
- Not suitable for high-power applications
Working Principles
The TC1264-2.5VDBTR operates based on a linear voltage regulation principle. It regulates the input voltage to a stable 2.5V output voltage by dissipating excess energy as heat.
Detailed Application Field Plans
TC1264-2.5VDBTR finds applications in various electronic devices, including but not limited to:
- Battery-powered devices
- Portable consumer electronics
- IoT devices
- Medical equipment
- Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to TC1264-2.5VDBTR are:
- LM1117-2.5V
- MCP1700-2.5V
- TS2950-2.5V
- LP2985-2.5V
- LT1761-2.5V
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
In conclusion, the TC1264-2.5VDBTR is a voltage regulator with a stable 2.5V output voltage. It is commonly used in various electronic devices due to its low dropout voltage, wide input voltage range, and protection features. However, it has limitations in terms of output current capacity, making it unsuitable for high-power applications.
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TC1264-2.5VDBTR en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of TC1264-2.5VDBTR in technical solutions:
Question: What is TC1264-2.5VDBTR?
- Answer: TC1264-2.5VDBTR is a specific voltage regulator integrated circuit (IC) designed to provide a stable output voltage of 2.5V.Question: What is the input voltage range for TC1264-2.5VDBTR?
- Answer: The input voltage range for TC1264-2.5VDBTR is typically between 2.7V and 6.0V.Question: What is the maximum output current of TC1264-2.5VDBTR?
- Answer: TC1264-2.5VDBTR can provide a maximum output current of 150mA.Question: Can TC1264-2.5VDBTR be used in battery-powered applications?
- Answer: Yes, TC1264-2.5VDBTR is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.Question: Is TC1264-2.5VDBTR a linear or switching regulator?
- Answer: TC1264-2.5VDBTR is a linear regulator, which means it regulates the output voltage by dissipating excess power as heat.Question: What is the dropout voltage of TC1264-2.5VDBTR?
- Answer: The dropout voltage of TC1264-2.5VDBTR is typically around 200mV at full load.Question: Can TC1264-2.5VDBTR handle short-circuit conditions?
- Answer: Yes, TC1264-2.5VDBTR has built-in short-circuit protection to prevent damage in case of a short circuit.Question: What is the operating temperature range for TC1264-2.5VDBTR?
- Answer: TC1264-2.5VDBTR can operate within a temperature range of -40°C to +125°C.Question: Can TC1264-2.5VDBTR be used in automotive applications?
- Answer: Yes, TC1264-2.5VDBTR is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.Question: Are there any specific application notes or reference designs available for TC1264-2.5VDBTR?
- Answer: Yes, the manufacturer of TC1264-2.5VDBTR typically provides application notes and reference designs that can help with the implementation of the IC in various technical solutions. These resources can be found on the manufacturer's website or by contacting their technical support team.