Consulte las especificaciones para obtener detalles del producto.
TC1265-2.5VOATR
Introduction
The TC1265-2.5VOATR is a voltage regulator that belongs to the category of electronic components used in various electrical and electronic devices. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Electronic component
- Use: Voltage regulation
- Characteristics: High precision, low dropout voltage, thermal shutdown protection
- Package: SOT-23-5
- Essence: Regulates input voltage to a stable output voltage
- Packaging/Quantity: Typically available in reels of 3000 units
Specifications
The TC1265-2.5VOATR has the following specifications: - Input Voltage Range: 2.7V to 6.0V - Output Voltage: 2.5V - Dropout Voltage: 150mV at 100mA - Quiescent Current: 75µA - Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The TC1265-2.5VOATR has a standard SOT-23-5 package with the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. EN (Enable)
Functional Features
- High precision output voltage
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit current limit
- Reverse battery protection
Advantages and Disadvantages
Advantages: - Stable output voltage - Wide input voltage range - Low quiescent current - Small package size
Disadvantages: - Limited maximum output current - Sensitivity to input voltage fluctuations
Working Principles
The TC1265-2.5VOATR operates by comparing the reference voltage with the feedback voltage from the output. It adjusts the pass transistor to maintain a stable output voltage despite variations in the input voltage.
Detailed Application Field Plans
The TC1265-2.5VOATR is commonly used in portable electronic devices, battery-powered systems, and low-power applications where a stable voltage supply is essential. Its precision and low dropout voltage make it suitable for powering sensitive integrated circuits and microcontrollers.
Detailed and Complete Alternative Models
Alternative models to the TC1265-2.5VOATR include the TC1265-3.3VOATR, TC1265-1.8VOATR, and TC1265-ADJVOATR. These models offer different fixed output voltages and cater to specific voltage regulation requirements.
This comprehensive entry provides insights into the TC1265-2.5VOATR, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
[Word count: 399]
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TC1265-2.5VOATR en soluciones técnicas
What is TC1265-2.5VOATR?
- TC1265-2.5VOATR is a specific type of voltage-controlled attenuator (VCA) used in electronic circuits to control the amplitude of a signal.
How does TC1265-2.5VOATR work?
- TC1265-2.5VOATR operates by adjusting the attenuation level of an input signal based on the control voltage applied to it, allowing for precise control over signal amplitudes.
What are the typical applications of TC1265-2.5VOATR?
- TC1265-2.5VOATR is commonly used in audio equipment, automatic gain control systems, RF communication systems, and instrumentation where dynamic signal level adjustments are required.
What is the voltage range for controlling TC1265-2.5VOATR?
- The control voltage range for TC1265-2.5VOATR typically varies from 0V to a specified maximum voltage, depending on the specific model and application requirements.
What are the key features of TC1265-2.5VOATR?
- Some key features include low distortion, wide bandwidth, high linearity, and low power consumption, making it suitable for various technical solutions.
Can TC1265-2.5VOATR be used in high-frequency applications?
- Yes, TC1265-2.5VOATR is designed to operate at high frequencies, making it suitable for RF and microwave applications.
Are there any specific thermal considerations when using TC1265-2.5VOATR?
- It's important to consider the thermal management of TC1265-2.5VOATR, especially in high-power applications, to ensure proper heat dissipation and reliable performance.
What are the recommended input and output impedance levels for TC1265-2.5VOATR?
- The recommended input and output impedance levels for TC1265-2.5VOATR depend on the specific application and circuit requirements, and should be carefully matched for optimal performance.
Can TC1265-2.5VOATR be controlled digitally?
- Some models of TC1265-2.5VOATR may have digital control interfaces, allowing for remote or automated control of attenuation levels.
Where can I find detailed technical specifications and application notes for TC1265-2.5VOATR?
- Detailed technical specifications and application notes for TC1265-2.5VOATR can typically be found in the product datasheet provided by the manufacturer or supplier, offering comprehensive guidance for its integration into technical solutions.