Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TC54VN2402ECB713
Ver Detalle Hojas de datos

TC54VN2402ECB713

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics:
    • Low dropout voltage
    • High accuracy
    • Low quiescent current
  • Package: ECB713
  • Essence: Provides stable and regulated output voltage
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 35µA typical
  • Load Regulation: ±0.5% typical
  • Line Regulation: ±0.3% typical
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TC54VN2402ECB713 has the following pin configuration:

  1. GND (Ground)
  2. VOUT (Output Voltage)
  3. VIN (Input Voltage)
  4. BYP (Bypass Capacitor)
  5. EN (Enable)

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • High accuracy provides precise output voltage regulation.
  • Low quiescent current minimizes power consumption.
  • Enable pin allows for easy on/off control.

Advantages and Disadvantages

Advantages: - Low dropout voltage enables operation with low input voltages. - High accuracy ensures stable output voltage under varying conditions. - Low quiescent current prolongs battery life in portable applications.

Disadvantages: - Limited input voltage range may restrict certain applications. - Higher cost compared to non-regulated voltage sources.

Working Principles

The TC54VN2402ECB713 is a linear voltage regulator that maintains a constant output voltage regardless of changes in input voltage or load conditions. It utilizes a feedback mechanism to adjust the internal pass transistor, ensuring the desired output voltage is maintained.

Detailed Application Field Plans

The TC54VN2402ECB713 is commonly used in various electronic devices and systems, including:

  1. Battery-powered devices: Portable electronics, such as smartphones, tablets, and wearable devices, benefit from the low quiescent current and stable output voltage provided by this voltage regulator.
  2. Automotive applications: The wide operating temperature range makes it suitable for use in automotive systems, such as infotainment systems, lighting controls, and engine management units.
  3. Industrial equipment: The high accuracy and low dropout voltage make it ideal for powering sensors, actuators, and control circuits in industrial automation systems.

Detailed and Complete Alternative Models

  1. LM1117-3.3: A popular alternative with similar specifications and pin configuration.
  2. LT1763: Offers lower dropout voltage and higher accuracy but comes in a different package.
  3. MCP1700: Provides a wider input voltage range and lower quiescent current, but may have slightly higher cost.

(Note: This list is not exhaustive and other alternatives may exist.)

Word count: 314 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TC54VN2402ECB713 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TC54VN2402ECB713 in technical solutions:

  1. Q: What is TC54VN2402ECB713? A: TC54VN2402ECB713 is a voltage supervisor IC (Integrated Circuit) that monitors the power supply voltage and provides a reset signal when the voltage falls below a certain threshold.

  2. Q: What is the operating voltage range of TC54VN2402ECB713? A: The operating voltage range of TC54VN2402ECB713 is typically between 1.6V and 5.5V.

  3. Q: How does TC54VN2402ECB713 help in technical solutions? A: TC54VN2402ECB713 ensures proper system operation by monitoring the power supply voltage and generating a reset signal to prevent erratic behavior or data corruption during power-up or power-down events.

  4. Q: Can TC54VN2402ECB713 be used in battery-powered applications? A: Yes, TC54VN2402ECB713 can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  5. Q: What is the typical reset threshold voltage of TC54VN2402ECB713? A: The typical reset threshold voltage of TC54VN2402ECB713 is 2.4V.

  6. Q: Does TC54VN2402ECB713 have an adjustable reset threshold voltage? A: No, TC54VN2402ECB713 has a fixed reset threshold voltage and does not offer adjustment options.

  7. Q: Can TC54VN2402ECB713 tolerate voltage spikes or transients? A: Yes, TC54VN2402ECB713 has built-in glitch immunity and can tolerate voltage spikes or transients up to 50ns.

  8. Q: What is the typical response time of TC54VN2402ECB713? A: The typical response time of TC54VN2402ECB713 is around 20µs.

  9. Q: Can TC54VN2402ECB713 be used in automotive applications? A: Yes, TC54VN2402ECB713 is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.

  10. Q: Does TC54VN2402ECB713 have any additional features? A: Yes, TC54VN2402ECB713 includes a manual reset input and an open-drain output, which allows for flexibility in system design and integration.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.