Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TSC87251G2D-L16CE
Ver Detalle Hojas de datos

TSC87251G2D-L16CE

Introduction

The TSC87251G2D-L16CE is a microcontroller belonging to the TSC87 series, designed for embedded systems and industrial applications. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems and industrial applications
  • Characteristics: High performance, low power consumption, integrated peripherals
  • Package: LQFP-48
  • Essence: Advanced control and processing capabilities
  • Packaging/Quantity: Tray packaging, quantity varies by supplier

Specifications

  • Architecture: 8-bit
  • CPU Speed: 16 MHz
  • Program Memory Size: 32 KB Flash
  • RAM Size: 2 KB
  • Operating Voltage Range: 2.7V to 5.5V
  • I/O Pins: 32
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 3 x 16-bit

Detailed Pin Configuration

For detailed pin configuration, refer to the manufacturer's datasheet or technical documentation.

Functional Features

  • Integrated Peripherals: ADC, PWM, GPIO
  • Analog-to-Digital Converter (ADC): High-resolution ADC for precise analog measurements
  • Pulse Width Modulation (PWM): Flexible PWM outputs for motor control and power regulation
  • General-Purpose Input/Output (GPIO): Versatile digital I/O for interfacing with external devices

Advantages and Disadvantages

Advantages

  • High CPU speed for rapid data processing
  • Low power consumption for energy-efficient operation
  • Rich set of integrated peripherals for diverse application support

Disadvantages

  • Limited program memory size may restrict complex application development
  • Restricted I/O pins compared to higher-end microcontrollers

Working Principles

The TSC87251G2D-L16CE operates on an 8-bit architecture, executing instructions at a maximum speed of 16 MHz. It interfaces with external components through its I/O pins and communication interfaces, utilizing its integrated peripherals to perform various tasks.

Detailed Application Field Plans

  • Industrial Automation: Control systems, sensor interfacing, and data acquisition
  • Embedded Systems: Consumer electronics, IoT devices, and smart appliances
  • Motor Control: Servo control, DC motor drive, and stepper motor control

Detailed and Complete Alternative Models

  • TSC87251G2D-L12CE: Lower clock speed variant
  • TSC87251G2D-L20CE: Higher clock speed variant with expanded memory

In conclusion, the TSC87251G2D-L16CE microcontroller offers a balance of performance and power efficiency, making it suitable for a wide range of embedded and industrial applications.

[Word Count: 410]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TSC87251G2D-L16CE en soluciones técnicas

  1. What is the TSC87251G2D-L16CE microcontroller used for?

    • The TSC87251G2D-L16CE microcontroller is commonly used in embedded systems for applications such as industrial control, automotive electronics, and consumer electronics.

  2. What are the key features of the TSC87251G2D-L16CE microcontroller?

    • The TSC87251G2D-L16CE microcontroller features a 16-bit CPU core, on-chip peripherals including timers, UARTs, and ADCs, and a wide operating voltage range, making it suitable for a variety of applications.

  3. How does the TSC87251G2D-L16CE microcontroller handle real-time tasks?

    • The TSC87251G2D-L16CE microcontroller has built-in hardware support for real-time operations, including interrupt handling and timer peripherals, which make it well-suited for real-time applications.

  4. Can the TSC87251G2D-L16CE microcontroller be used for motor control applications?

    • Yes, the TSC87251G2D-L16CE microcontroller can be used for motor control applications, thanks to its integrated PWM modules and high-speed I/O capabilities.

  5. What development tools are available for programming the TSC87251G2D-L16CE microcontroller?

    • There are various development tools available, including integrated development environments (IDEs), compilers, and debuggers from third-party vendors that support programming the TSC87251G2D-L16CE microcontroller.

  6. Is the TSC87251G2D-L16CE microcontroller suitable for low-power applications?

    • Yes, the TSC87251G2D-L16CE microcontroller offers low-power modes and features that make it suitable for battery-powered or energy-efficient applications.

  7. What communication interfaces are supported by the TSC87251G2D-L16CE microcontroller?

    • The TSC87251G2D-L16CE microcontroller supports various communication interfaces, including UART, SPI, and I2C, enabling seamless integration with other devices and systems.

  8. Can the TSC87251G2D-L16CE microcontroller be used in safety-critical applications?

    • The TSC87251G2D-L16CE microcontroller can be used in safety-critical applications, provided that proper design and validation processes are followed to ensure compliance with relevant safety standards.

  9. What are the memory options available for the TSC87251G2D-L16CE microcontroller?

    • The TSC87251G2D-L16CE microcontroller typically offers a range of memory options, including on-chip flash memory, RAM, and EEPROM, providing flexibility for different application requirements.

  10. Are there any application notes or reference designs available for the TSC87251G2D-L16CE microcontroller?

    • Yes, many manufacturers provide application notes, reference designs, and technical documentation to assist developers in effectively utilizing the TSC87251G2D-L16CE microcontroller in their technical solutions.