Microsemi Corporation
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
JANTX2N4033UB
Ver Detalle Hojas de datos

JANTX2N4033UB

Product Overview

Category

The JANTX2N4033UB belongs to the category of bipolar junction transistors (BJTs).

Use

It is commonly used as a general-purpose amplifier or switch in various electronic circuits.

Characteristics

  • High current gain
  • Low noise
  • High voltage capability

Package

The JANTX2N4033UB is typically available in a TO-18 metal can package.

Essence

This transistor is essential for amplifying and switching signals in electronic devices.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Base Voltage (Vcbo): 40V
  • Collector-Emitter Voltage (Vceo): 40V
  • Emitter-Base Voltage (Vebo): 5V
  • Collector Current (Ic): 0.5A
  • Power Dissipation (Pd): 625mW
  • Transition Frequency (ft): 100MHz
  • Operating Temperature: -65°C to 200°C

Detailed Pin Configuration

The JANTX2N4033UB has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain allows for small base current to control larger collector current.
  • Low noise makes it suitable for audio applications.
  • High voltage capability enables use in high-power circuits.

Advantages and Disadvantages

Advantages

  • High current gain
  • Low noise
  • High voltage capability

Disadvantages

  • Limited power dissipation compared to some other transistors
  • Relatively low transition frequency

Working Principles

The JANTX2N4033UB operates based on the principles of controlling current flow between its collector and emitter terminals using a small current at its base terminal. This allows it to amplify or switch electronic signals effectively.

Detailed Application Field Plans

The JANTX2N4033UB is widely used in the following applications: - Audio amplifiers - Switching circuits - Signal amplification in communication systems - Control circuits in industrial electronics

Detailed and Complete Alternative Models

Some alternative models to the JANTX2N4033UB include: - 2N3904 - BC547 - 2N2222 - BC548 - 2N4401

In conclusion, the JANTX2N4033UB is a versatile BJT with high current gain, low noise, and high voltage capability, making it suitable for a wide range of electronic applications.

[Word count: 398]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de JANTX2N4033UB en soluciones técnicas

  1. What is the maximum collector current of JANTX2N4033UB?

    • The maximum collector current of JANTX2N4033UB is 600mA.

  2. What is the maximum power dissipation of JANTX2N4033UB?

    • The maximum power dissipation of JANTX2N4033UB is 625mW.

  3. What is the voltage rating of JANTX2N4033UB?

    • The voltage rating of JANTX2N4033UB is 40V.

  4. What are the typical applications for JANTX2N4033UB?

    • JANTX2N4033UB is commonly used in low-power amplification and switching applications.

  5. What is the gain range of JANTX2N4033UB?

    • The gain range of JANTX2N4033UB is typically 30 to 300.

  6. Is JANTX2N4033UB suitable for use in high-frequency applications?

    • Yes, JANTX2N4033UB can be used in moderate frequency applications due to its transition frequency of 100MHz.

  7. What is the operating temperature range of JANTX2N4033UB?

    • The operating temperature range of JANTX2N4033UB is -55°C to 150°C.

  8. Does JANTX2N4033UB require a heat sink for certain applications?

    • Depending on the specific application and power dissipation, a heat sink may be required for JANTX2N4033UB.

  9. Can JANTX2N4033UB be used in audio amplifier circuits?

    • Yes, JANTX2N4033UB can be used in low-power audio amplifier circuits.

  10. What are the key differences between JANTX2N4033UB and similar transistors?

    • JANTX2N4033UB offers higher reliability and performance compared to standard commercial transistors, making it suitable for critical applications in harsh environments.