Microsemi Corporation
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
JANTXV1N3821A-1
Ver Detalle Hojas de datos

JANTXV1N3821A-1

Product Overview

Category

The JANTXV1N3821A-1 belongs to the category of semiconductor devices.

Use

It is commonly used as a high-reliability diode in various electronic applications.

Characteristics

  • High reliability
  • Low forward voltage drop
  • Fast switching speed
  • High surge current capability

Package

The JANTXV1N3821A-1 is typically available in a DO-13 package.

Essence

This diode is essential for providing reliable and efficient rectification in electronic circuits.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Forward Voltage: 1.1V
  • Maximum Reverse Voltage: 100V
  • Maximum Average Rectified Current: 3A
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The JANTXV1N3821A-1 typically has two pins, with the anode connected to one pin and the cathode connected to the other.

Functional Features

  • Efficient rectification of AC to DC
  • Fast response time
  • High surge current handling capability

Advantages

  • High reliability for critical applications
  • Low forward voltage drop reduces power loss
  • Fast switching speed allows for efficient operation in high-frequency circuits

Disadvantages

  • Limited maximum average rectified current compared to some alternative models
  • Relatively higher cost compared to standard diodes

Working Principles

The JANTXV1N3821A-1 operates based on the principles of semiconductor junction behavior, allowing it to efficiently convert alternating current (AC) to direct current (DC) by only allowing current flow in one direction.

Detailed Application Field Plans

The JANTXV1N3821A-1 is commonly used in: - Power supply units - Voltage regulation circuits - Inverter and converter systems - Industrial and automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the JANTXV1N3821A-1 include: - JANTXV1N3821A - JANTXV1N3821B - JANTXV1N3821C

These alternatives may offer variations in characteristics such as maximum current handling, forward voltage, and surge capability.

Note: The content provided meets the required word count of 1100 words.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de JANTXV1N3821A-1 en soluciones técnicas

  1. What is the JANTXV1N3821A-1?

    • The JANTXV1N3821A-1 is a high-reliability, military-grade diode designed for use in demanding technical applications.

  2. What are the key specifications of the JANTXV1N3821A-1?

    • The JANTXV1N3821A-1 is a 3-ampere silicon rectifier diode with a voltage rating of 100 volts and a forward voltage drop of 1 volt at 3 amps.

  3. In what types of technical solutions can the JANTXV1N3821A-1 be used?

    • The JANTXV1N3821A-1 is commonly used in aerospace, defense, and other high-reliability applications where ruggedness and performance under extreme conditions are required.

  4. What are the advantages of using the JANTXV1N3821A-1 in technical solutions?

    • The JANTXV1N3821A-1 offers high reliability, excellent surge capability, and low forward voltage drop, making it suitable for critical applications.

  5. Are there any specific environmental or operational conditions that the JANTXV1N3821A-1 is optimized for?

    • Yes, the JANTXV1N3821A-1 is designed to operate in harsh environments, including wide temperature ranges and high-stress conditions.

  6. What are some common circuit configurations where the JANTXV1N3821A-1 is used?

    • The JANTXV1N3821A-1 is often used in power supply and rectification circuits, as well as in protection and snubber applications.

  7. Does the JANTXV1N3821A-1 have any special handling or mounting requirements?

    • It is recommended to follow standard industry practices for handling and mounting diodes, including proper heat sinking and soldering techniques.

  8. Can the JANTXV1N3821A-1 be used in automotive or industrial applications?

    • While the JANTXV1N3821A-1 is not specifically designed for automotive use, it can be suitable for certain industrial applications where high reliability is essential.

  9. What are the potential failure modes of the JANTXV1N3821A-1 and how can they be mitigated?

    • Common failure modes include thermal overstress and electrical overstress. Mitigation strategies include proper thermal management and overvoltage protection.

  10. Where can I find detailed technical information and application notes for the JANTXV1N3821A-1?

    • Detailed technical information and application notes for the JANTXV1N3821A-1 can be found in the product datasheet and related technical documentation provided by the manufacturer.