Microsemi Corporation
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
JANTXV1N4123UR-1
Ver Detalle Hojas de datos

JANTXV1N4123UR-1

Product Overview

Category

The JANTXV1N4123UR-1 belongs to the category of semiconductor devices.

Use

It is commonly used as a high-reliability diode in various electronic applications.

Characteristics

  • High reliability
  • Low forward voltage drop
  • Fast switching speed
  • High surge current capability

Package

The JANTXV1N4123UR-1 is typically available in a DO-41 package.

Essence

The essence of the JANTXV1N4123UR-1 lies in its ability to provide reliable and efficient diode functionality in demanding environments.

Packaging/Quantity

It is usually packaged in reels or tubes, with varying quantities depending on the manufacturer.

Specifications

  • Maximum repetitive peak reverse voltage: 100V
  • Average rectified forward current: 1A
  • Non-repetitive peak surge current: 30A
  • Operating temperature range: -65°C to +175°C

Detailed Pin Configuration

The JANTXV1N4123UR-1 has two pins, an anode, and a cathode. The anode is typically marked with a band on the body of the diode.

Functional Features

  • Reliable rectification of alternating current (AC) to direct current (DC)
  • Fast response time for switching applications
  • High surge current handling capability

Advantages

  • High reliability makes it suitable for critical applications
  • Low forward voltage drop reduces power dissipation
  • Fast switching speed allows for efficient operation in high-frequency circuits

Disadvantages

  • Limited maximum repetitive peak reverse voltage compared to some other diodes
  • Relatively low average rectified forward current compared to higher-power diodes

Working Principles

The JANTXV1N4123UR-1 operates based on the principles of semiconductor junctions, allowing for the unidirectional flow of current and efficient rectification of AC to DC.

Detailed Application Field Plans

The JANTXV1N4123UR-1 is commonly used in: - Power supply units - Voltage regulation circuits - Switching power converters - Signal demodulation circuits

Detailed and Complete Alternative Models

Some alternative models to the JANTXV1N4123UR-1 include: - 1N4001 - 1N4002 - 1N4003 - 1N4004

In conclusion, the JANTXV1N4123UR-1 is a reliable and efficient diode that finds widespread use in various electronic applications due to its high surge current capability, fast switching speed, and low forward voltage drop.

[Word Count: 324]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de JANTXV1N4123UR-1 en soluciones técnicas

  1. What is the JANTXV1N4123UR-1?

    • The JANTXV1N4123UR-1 is a high-reliability, military-grade silicon power rectifier diode designed for use in demanding technical applications.

  2. What are the key specifications of the JANTXV1N4123UR-1?

    • The JANTXV1N4123UR-1 has a maximum repetitive reverse voltage of 200 volts, a forward current of 1 ampere, and a low forward voltage drop.

  3. In what type of technical solutions can the JANTXV1N4123UR-1 be used?

    • The JANTXV1N4123UR-1 is commonly used in aerospace, defense, and other high-reliability applications where ruggedness and reliability are critical.

  4. What are the temperature range and storage conditions for the JANTXV1N4123UR-1?

    • The JANTXV1N4123UR-1 is designed to operate over a wide temperature range, typically from -65°C to +175°C, and should be stored in a dry environment at room temperature.

  5. Does the JANTXV1N4123UR-1 require any special handling during assembly or installation?

    • Yes, the JANTXV1N4123UR-1 should be handled with care to avoid electrostatic discharge (ESD) and should be mounted using appropriate techniques to ensure proper heat dissipation.

  6. Can the JANTXV1N4123UR-1 be used in high-frequency applications?

    • While the JANTXV1N4123UR-1 is not specifically designed for high-frequency applications, it can be used in certain moderate-speed switching applications.

  7. What are the typical failure modes of the JANTXV1N4123UR-1?

    • The JANTXV1N4123UR-1 can fail due to excessive current, voltage spikes, or thermal stress, so proper circuit protection and thermal management are important.

  8. Are there any recommended alternative components to the JANTXV1N4123UR-1?

    • Depending on the specific requirements of the application, alternative high-reliability diodes from manufacturers such as Microsemi, Vishay, or ON Semiconductor may be considered.

  9. What are the common packaging options available for the JANTXV1N4123UR-1?

    • The JANTXV1N4123UR-1 is typically available in industry-standard packages such as DO-41, DO-204AL, or similar axial leaded packages.

  10. Where can I find detailed application notes and technical documentation for the JANTXV1N4123UR-1?

    • Detailed technical information, including application notes and datasheets, can be obtained from the manufacturer's website or authorized distributors.