Microsemi Corporation
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MBR20100FCTE3/TU

MBR20100FCTE3/TU

Introduction

The MBR20100FCTE3/TU is a high-performance Schottky barrier rectifier designed for use in various electronic applications. This entry provides an overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor/Electronic Component
  • Use: Rectification in power supply, voltage regulation, and reverse polarity protection
  • Characteristics: High efficiency, low forward voltage drop, fast switching speed
  • Package: TO-220AB
  • Essence: Schottky Barrier Rectifier
  • Packaging/Quantity: Tape & Reel (800 units)

Specifications

  • Voltage Rating: 100V
  • Average Forward Current: 20A
  • Peak Forward Surge Current: 200A
  • Operating Temperature Range: -65°C to +175°C
  • Storage Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The MBR20100FCTE3/TU has a standard TO-220AB package with three pins: 1. Anode 2. Cathode 3. Thermal Pad

Functional Features

  • Low forward voltage drop
  • High-frequency operation capability
  • Excellent thermal performance
  • Low power loss

Advantages and Disadvantages

Advantages

  • High efficiency
  • Fast switching speed
  • Suitable for high-frequency applications
  • Good thermal management

Disadvantages

  • Relatively higher cost compared to standard rectifiers
  • Sensitive to reverse voltage spikes

Working Principles

The MBR20100FCTE3/TU operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes. When a forward bias is applied, the rectifier conducts current efficiently due to the absence of minority carrier storage time.

Detailed Application Field Plans

The MBR20100FCTE3/TU is widely used in the following applications: - Switching power supplies - DC-DC converters - Reverse polarity protection circuits - Battery charging systems - Solar panel inverters

Detailed and Complete Alternative Models

  • MBR2045CT: 45V, 20A Schottky Barrier Rectifier
  • MBR30100PT: 100V, 30A Schottky Barrier Rectifier
  • MBR40150PT: 150V, 40A Schottky Barrier Rectifier
  • MBRB20100CT: 100V, 20A Schottky Barrier Rectifier

In conclusion, the MBR20100FCTE3/TU is a high-performance Schottky barrier rectifier with excellent characteristics suitable for various electronic applications. Its efficient operation, fast switching speed, and high-frequency capability make it a preferred choice in power supply and voltage regulation systems.

(Word count: 411)

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MBR20100FCTE3/TU en soluciones técnicas

Sure, here are 10 common questions and answers related to the application of MBR20100FCTE3/TU in technical solutions:

  1. What is MBR20100FCTE3/TU?

    • MBR20100FCTE3/TU is a dual Schottky barrier rectifier designed for high frequency DC-DC converters, power factor correction, and reverse polarity protection applications.

  2. What is the maximum average forward current rating of MBR20100FCTE3/TU?

    • The maximum average forward current rating of MBR20100FCTE3/TU is 10A.

  3. What is the maximum repetitive peak reverse voltage of MBR20100FCTE3/TU?

    • The maximum repetitive peak reverse voltage of MBR20100FCTE3/TU is 100V.

  4. What are the typical applications of MBR20100FCTE3/TU?

    • Typical applications of MBR20100FCTE3/TU include switch mode power supplies, freewheeling diodes, OR-ing diodes, and reverse battery protection.

  5. What is the forward voltage drop of MBR20100FCTE3/TU at a specified current?

    • The forward voltage drop of MBR20100FCTE3/TU is typically around 0.55V at 10A.

  6. Is MBR20100FCTE3/TU suitable for high frequency applications?

    • Yes, MBR20100FCTE3/TU is specifically designed for high frequency DC-DC converters and is suitable for high frequency applications.

  7. Can MBR20100FCTE3/TU be used for power factor correction circuits?

    • Yes, MBR20100FCTE3/TU is suitable for use in power factor correction circuits due to its fast switching characteristics.

  8. Does MBR20100FCTE3/TU have a low leakage current?

    • Yes, MBR20100FCTE3/TU has a low reverse leakage current, making it suitable for applications requiring minimal power loss.

  9. What is the operating temperature range of MBR20100FCTE3/TU?

    • The operating temperature range of MBR20100FCTE3/TU is -65°C to +175°C, making it suitable for a wide range of environments.

  10. Is MBR20100FCTE3/TU RoHS compliant?

    • Yes, MBR20100FCTE3/TU is RoHS compliant, ensuring it meets environmental standards for electronic components.