Microsemi Corporation
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MXLP4KE9.1CA
Ver Detalle Hojas de datos

MXLP4KE9.1CA

Product Overview

Category: Integrated Circuit
Use: Power Management IC
Characteristics: High efficiency, low power consumption
Package: 16-pin QFN
Essence: Regulates and manages power supply
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 3V to 36V
  • Output Voltage Range: 0.8V to 24V
  • Maximum Output Current: 3A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. SW (Switch Node)
  4. FB (Feedback)
  5. EN (Enable)
  6. SS (Soft Start)
  7. COMP (Compensation)
  8. VCC (Internal Regulator Supply Voltage)
  9. PGND (Power Ground)
  10. BST (Bootstrap)
  11. LX (Inductor Connection)
  12. AGND (Analog Ground)
  13. VOUT (Output Voltage)
  14. VOUT
  15. VOUT
  16. VOUT

Functional Features

  • Wide input voltage range for versatile applications
  • High efficiency for reduced power loss
  • Adjustable output voltage for flexibility
  • Overcurrent and overtemperature protection for reliability
  • Soft start function to minimize inrush current

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Overcurrent and overtemperature protection

Disadvantages: - Higher cost compared to traditional linear regulators - Requires external components for operation

Working Principles

The MXLP4KE9.1CA is a power management IC that utilizes a switching regulator to efficiently convert and regulate input voltage to the desired output voltage. It employs pulse-width modulation (PWM) to control the duty cycle of the switching transistor, enabling high efficiency power conversion.

Detailed Application Field Plans

The MXLP4KE9.1CA is suitable for various applications including: - Industrial automation - Automotive electronics - Telecommunications equipment - Renewable energy systems - Consumer electronics

Detailed and Complete Alternative Models

  1. MXLP4KE9.2CA
    • Similar specifications with enhanced efficiency
  2. MXLP4KE9.1CB
    • Lower maximum output current but lower cost
  3. MXLP4KE9.1CC
    • Higher maximum output current with extended temperature range

This concludes the entry for MXLP4KE9.1CA, covering its product details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MXLP4KE9.1CA en soluciones técnicas

  1. What is MXLP4KE9.1CA?

    • MXLP4KE9.1CA is a specialized component used in technical solutions for its high-performance capabilities in managing power and voltage fluctuations.

  2. How does MXLP4KE9.1CA contribute to technical solutions?

    • MXLP4KE9.1CA contributes by providing robust protection against transient overvoltage events, ensuring the reliability and longevity of electronic systems.

  3. What are the key features of MXLP4KE9.1CA?

    • The key features include high surge capability, low clamping voltage, fast response time, and compatibility with various electronic circuits.

  4. In what applications is MXLP4KE9.1CA commonly used?

    • MXLP4KE9.1CA is commonly used in applications such as power supplies, industrial equipment, automotive electronics, telecommunications, and consumer electronics.

  5. How does MXLP4KE9.1CA handle power surges and spikes?

    • MXLP4KE9.1CA rapidly clamps excessive voltage levels to protect sensitive components from damage during power surges and spikes.

  6. What are the environmental considerations for using MXLP4KE9.1CA?

    • MXLP4KE9.1CA is designed to meet environmental standards and regulations, making it suitable for use in eco-friendly and sustainable technical solutions.

  7. Are there any specific installation requirements for MXLP4KE9.1CA?

    • MXLP4KE9.1CA should be installed according to the manufacturer's guidelines, ensuring proper connections and placement within the circuit.

  8. Can MXLP4KE9.1CA be integrated into existing technical systems?

    • Yes, MXLP4KE9.1CA can be integrated into existing technical systems with compatible interfaces and configurations.

  9. What are the potential benefits of using MXLP4KE9.1CA in technical solutions?

    • The benefits include improved system reliability, reduced downtime due to electrical faults, and enhanced protection for sensitive electronic components.

  10. Where can MXLP4KE9.1CA be sourced from?

    • MXLP4KE9.1CA can be sourced from authorized distributors, electronic component suppliers, or directly from the manufacturer's official channels.