Microsemi Corporation
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MXPLAD15KP45AE3
Ver Detalle Hojas de datos

MXPLAD15KP45AE3 Product Overview

Introduction

The MXPLAD15KP45AE3 belongs to the category of transient voltage suppressor (TVS) diodes and is designed for use in surge protection applications. This entry provides a comprehensive overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Surge Protection
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: Axial Leaded
  • Essence: Provides protection against voltage transients
  • Packaging/Quantity: Available in various packaging options, typically supplied in reels or tubes

Specifications

  • Part Number: MXPLAD15KP45AE3
  • Voltage - Reverse Standoff (Typ): 38.5V
  • Voltage - Breakdown: 42.8V
  • Clamping Voltage @ Ipp: 61.8V
  • Current - Peak Pulse (10/1000µs): 243.6A
  • Power - Peak Pulse: 15000W
  • Type: Zener
  • Technology: Silicon Avalanche

Detailed Pin Configuration

The MXPLAD15KP45AE3 TVS diode has an axial leaded package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • High Surge Capability: Capable of withstanding high surge currents
  • Low Clamping Voltage: Provides effective protection by limiting the voltage across the circuit
  • Fast Response Time: Rapidly responds to transient voltage spikes

Advantages and Disadvantages

Advantages

  • Effective surge protection
  • Low clamping voltage ensures minimal impact on protected circuits
  • Fast response time for rapid protection

Disadvantages

  • Higher cost compared to standard diodes
  • Requires careful consideration of placement and routing for optimal performance

Working Principles

The MXPLAD15KP45AE3 operates based on the principle of avalanche breakdown. When a transient voltage spike occurs, the diode rapidly conducts, diverting the excess energy away from the protected circuit. This action helps prevent damage to sensitive components.

Detailed Application Field Plans

The MXPLAD15KP45AE3 is commonly used in various applications requiring surge protection, including: - Power supply units - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

For users seeking alternative TVS diode models, the following options are available: 1. MXPLAD15KP40AE3: Similar specifications with slightly lower clamping voltage 2. MXPLAD15KP48AE3: Higher breakdown voltage for enhanced protection 3. MXPLAD15KP50AE3: Increased power handling capability for more demanding applications

In conclusion, the MXPLAD15KP45AE3 TVS diode offers robust surge protection capabilities, making it suitable for a wide range of applications. Its high surge capability, low clamping voltage, and fast response time make it an ideal choice for safeguarding sensitive electronic circuits against transient voltage events.

Word Count: 498

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MXPLAD15KP45AE3 en soluciones técnicas

  1. What is MXPLAD15KP45AE3?

    • MXPLAD15KP45AE3 is a high-power transient voltage suppressor diode designed to protect sensitive electronics from voltage spikes and transients.

  2. What is the maximum voltage rating of MXPLAD15KP45AE3?

    • The maximum voltage rating of MXPLAD15KP45AE3 is 45 volts.

  3. What is the peak pulse power handling capability of MXPLAD15KP45AE3?

    • MXPLAD15KP45AE3 can handle peak pulse power up to 15000 watts.

  4. In what applications can MXPLAD15KP45AE3 be used?

    • MXPLAD15KP45AE3 is commonly used in surge protection for telecommunications equipment, industrial control systems, and automotive electronics.

  5. What is the response time of MXPLAD15KP45AE3?

    • MXPLAD15KP45AE3 has a very fast response time, typically in the nanosecond range.

  6. Does MXPLAD15KP45AE3 require any external components for proper operation?

    • MXPLAD15KP45AE3 does not require any external components for its basic operation, but it may be used in conjunction with other circuit protection devices for enhanced performance.

  7. What are the environmental specifications for MXPLAD15KP45AE3?

    • MXPLAD15KP45AE3 is designed to meet industry-standard environmental specifications, including temperature and humidity ranges.

  8. Can MXPLAD15KP45AE3 be used in high-frequency applications?

    • MXPLAD15KP45AE3 is suitable for use in high-frequency applications due to its fast response time and low capacitance.

  9. Is MXPLAD15KP45AE3 RoHS compliant?

    • Yes, MXPLAD15KP45AE3 is compliant with the Restriction of Hazardous Substances (RoHS) directive.

  10. What are the recommended mounting and soldering techniques for MXPLAD15KP45AE3?

    • MXPLAD15KP45AE3 is typically mounted using standard surface mount techniques and follows industry-standard soldering guidelines for electronic components.