74LVTH16244BDGG,51

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Logic Level Translator
• Characteristics: High-speed, low-power, voltage-level shifting
• Package: TSSOP (Thin Shrink Small Outline Package)
• Essence: Bidirectional voltage-level translator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 2.7V to 3.6V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Maximum Operating Frequency: 80 MHz
• Number of Channels: 16
• Logic Family: LVTH

Detailed Pin Configuration

The 74LVTH16244BDGG,51 IC has a total of 48 pins, which are distributed as follows: - Pins 1 to 24: A-side data input/output (DQ) - Pins 25 to 48: B-side data input/output (DQ)

Functional Features

• Bidirectional voltage-level translation between two different voltage domains.
• Supports high-speed operation with low power consumption.
• Provides non-inverting level shifting for both input and output signals.
• Allows direct interfacing between devices operating at different voltage levels.

Advantages

• Wide supply voltage range allows compatibility with various systems.
• High-speed operation enables efficient data transfer.
• Low power consumption helps in reducing overall system energy requirements.
• Bidirectional capability simplifies the design of bidirectional communication interfaces.

Disadvantages

• Limited maximum operating frequency compared to some other logic level translators.
• Requires careful consideration of signal integrity due to potential voltage level mismatches.
• May introduce slight propagation delays during voltage level translation.

Working Principles

The 74LVTH16244BDGG,51 utilizes a combination of MOSFETs and CMOS technology to achieve voltage-level translation. It employs a voltage divider network and level-shifting circuitry to convert signals between two different voltage domains while maintaining signal integrity.

Detailed Application Field Plans

The 74LVTH16244BDGG,51 is commonly used in various applications, including: - Communication systems: for interfacing between devices operating at different voltage levels, such as microcontrollers and sensors. - Data acquisition systems: for level shifting between analog and digital signals. - Industrial automation: for connecting modules with different voltage requirements. - Consumer electronics: for bidirectional communication between devices with varying voltage levels.

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the 74LVTH16244BDGG,51 are: - SN74LVC1T45: Unidirectional voltage-level translator with a single channel. - TXB0108: Bidirectional voltage-level translator with 8 channels. - PCA9306: I2C bus voltage-level translator with automatic direction sensing.

Note: The above-mentioned alternatives may have different specifications and pin configurations. It is important to carefully review their datasheets before selecting an alternative model.

This entry provides a comprehensive overview of the 74LVTH16244BDGG,51 logic level translator. It includes basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.