Nexperia USA Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PMBT3906MB,315
Ver Detalle Hojas de datos

PMBT3906MB,315

Product Overview

Category

The PMBT3906MB,315 belongs to the category of bipolar transistors.

Use

It is commonly used as a general-purpose PNP transistor in various electronic applications.

Characteristics

  • Low power dissipation
  • High current gain
  • Small package size

Package

The PMBT3906MB,315 is typically available in a SOT-23 package.

Essence

This transistor is essential for amplification and switching purposes in electronic circuits.

Packaging/Quantity

It is usually supplied in reels with a quantity of 3000 units per reel.

Specifications

  • Collector-Base Voltage (VCBO): -40 V
  • Collector-Emitter Voltage (VCEO): -40 V
  • Emitter-Base Voltage (VEBO): -5 V
  • Collector Current (IC): -200 mA
  • Power Dissipation (Ptot): 225 mW
  • Transition Frequency (ft): 250 MHz

Detailed Pin Configuration

The PMBT3906MB,315 has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • High current gain
  • Low saturation voltage
  • Fast switching speed

Advantages

  • Small package size
  • Suitable for low-power applications
  • Wide range of operating temperatures

Disadvantages

  • Limited collector current compared to other transistors
  • Relatively low breakdown voltage

Working Principles

The PMBT3906MB,315 operates based on the principles of bipolar junction transistors, where the flow of current is controlled by the application of a small signal at the base terminal.

Detailed Application Field Plans

This transistor is widely used in: - Audio amplifiers - Switching circuits - Signal amplification - Voltage regulation circuits

Detailed and Complete Alternative Models

Some alternative models to PMBT3906MB,315 include: - 2N3906 - BC857B - MMBT3906

In conclusion, the PMBT3906MB,315 is a versatile PNP transistor with a compact package size and high current gain, making it suitable for various low-power electronic applications.

[Word count: 274]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PMBT3906MB,315 en soluciones técnicas

  1. What is the PMBT3906MB,315 transistor used for?

    • The PMBT3906MB,315 is a general-purpose PNP transistor commonly used in amplification and switching applications.

  2. What are the key specifications of the PMBT3906MB,315 transistor?

    • The PMBT3906MB,315 has a maximum collector current of 200mA, a maximum collector-base voltage of -40V, and a maximum power dissipation of 300mW.

  3. How do I connect the PMBT3906MB,315 in a common-emitter configuration?

    • To use the PMBT3906MB,315 in a common-emitter configuration, connect the emitter to ground, the base to the input signal, and the collector to the output load.

  4. Can the PMBT3906MB,315 be used in high-frequency applications?

    • Yes, the PMBT3906MB,315 can be used in moderate frequency applications due to its transition frequency of 250MHz.

  5. What are some typical applications of the PMBT3906MB,315 transistor?

    • Typical applications include audio amplification, signal processing, and general purpose switching.

  6. What is the maximum junction temperature of the PMBT3906MB,315?

    • The PMBT3906MB,315 has a maximum junction temperature of 150°C.

  7. Does the PMBT3906MB,315 require a heat sink for normal operation?

    • In most low-power applications, the PMBT3906MB,315 does not require a heat sink. However, in high-power applications or when operating close to the maximum power dissipation, a heat sink may be necessary.

  8. What are the recommended storage conditions for the PMBT3906MB,315?

    • It is recommended to store the PMBT3906MB,315 in a dry environment at temperatures between -55°C and 150°C.

  9. Can the PMBT3906MB,315 be used in automotive applications?

    • Yes, the PMBT3906MB,315 is suitable for use in automotive electronics due to its robustness and reliability.

  10. Are there any known common failure modes for the PMBT3906MB,315?

    • Common failure modes include overcurrent damage, excessive power dissipation, and ESD (electrostatic discharge) events. Proper circuit protection and design considerations can mitigate these risks.