NXP USA Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MC9S08DN60AMLH
Ver Detalle Hojas de datos

MC9S08DN60AMLH

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, consumer electronics, industrial automation
  • Characteristics: Low power consumption, high performance, small form factor
  • Package: LQFP-64
  • Essence: 8-bit microcontroller with integrated peripherals
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 60 MHz
  • Flash Memory: 60 KB
  • RAM: 4 KB
  • Operating Voltage: 2.7V to 5.5V
  • I/O Pins: 54
  • Timers: 6
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 16 channels
  • Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC9S08DN60AMLH microcontroller has a total of 64 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. PTA0 - General-purpose I/O pin
  4. PTA1 - General-purpose I/O pin
  5. PTA2 - General-purpose I/O pin
  6. PTA3 - General-purpose I/O pin
  7. PTA4 - General-purpose I/O pin
  8. PTA5 - General-purpose I/O pin
  9. PTA6 - General-purpose I/O pin
  10. PTA7 - General-purpose I/O pin
  11. RESET - Reset pin
  12. PTB0 - General-purpose I/O pin
  13. PTB1 - General-purpose I/O pin
  14. PTB2 - General-purpose I/O pin
  15. PTB3 - General-purpose I/O pin
  16. PTB4 - General-purpose I/O pin
  17. PTB5 - General-purpose I/O pin
  18. PTB6 - General-purpose I/O pin
  19. PTB7 - General-purpose I/O pin
  20. PTC0 - General-purpose I/O pin
  21. PTC1 - General-purpose I/O pin
  22. PTC2 - General-purpose I/O pin
  23. PTC3 - General-purpose I/O pin
  24. PTC4 - General-purpose I/O pin
  25. PTC5 - General-purpose I/O pin
  26. PTC6 - General-purpose I/O pin
  27. PTC7 - General-purpose I/O pin
  28. VDDA - Analog power supply voltage
  29. VREFH - High reference voltage for ADC
  30. VREFL - Low reference voltage for ADC
  31. AD0 - Analog input channel 0
  32. AD1 - Analog input channel 1
  33. AD2 - Analog input channel 2
  34. AD3 - Analog input channel 3
  35. AD4 - Analog input channel 4
  36. AD5 - Analog input channel 5
  37. AD6 - Analog input channel 6
  38. AD7 - Analog input channel 7
  39. AD8 - Analog input channel 8
  40. AD9 - Analog input channel 9
  41. AD10 - Analog input channel 10
  42. AD11 - Analog input channel 11
  43. AD12 - Analog input channel 12
  44. AD13 - Analog input channel 13
  45. AD14 - Analog input channel 14
  46. AD15 - Analog input channel 15
  47. VSSA - Analog ground
  48. IRQ - Interrupt request pin
  49. BKGD - Background debug mode pin
  50. PTD0 - General-purpose I/O pin
  51. PTD1 - General-purpose I/O pin
  52. PTD2 - General-purpose I/O pin
  53. PTD3 - General-purpose I/O pin
  54. PTD4 - General-purpose I/O pin
  55. PTD5 - General-purpose I/O pin
  56. PTD6 - General-purpose I/O pin
  57. PTD7 - General-purpose I/O pin
  58. PTE0 - General-purpose I/O pin
  59. PTE1 - General-purpose I/O pin
  60. PTE2 - General-purpose I/O pin
  61. PTE3 - General-purpose I/O pin
  62. PTE4 - General-purpose I/O pin
  63. PTE5 - General-purpose I/O pin
  64. PTE6 - General-purpose I/O pin

Functional Features

  • High-performance 8-bit CPU with a wide range of instructions
  • Integrated peripherals such as UART, SPI, and I2C for communication
  • 10-bit ADC for analog signal conversion
  • Multiple timers for precise timing

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MC9S08DN60AMLH en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MC9S08DN60AMLH in technical solutions:

  1. Q: What is MC9S08DN60AMLH? A: MC9S08DN60AMLH is a microcontroller from NXP Semiconductors, specifically designed for embedded applications.

  2. Q: What are the key features of MC9S08DN60AMLH? A: Some key features include a 8-bit HCS08 CPU core, 60KB flash memory, 4KB RAM, multiple communication interfaces, and various peripherals.

  3. Q: What are the typical applications of MC9S08DN60AMLH? A: MC9S08DN60AMLH is commonly used in applications such as industrial control systems, consumer electronics, automotive systems, and home automation.

  4. Q: How can I program MC9S08DN60AMLH? A: MC9S08DN60AMLH can be programmed using various development tools like CodeWarrior IDE, IAR Embedded Workbench, or other compatible software.

  5. Q: What programming languages are supported by MC9S08DN60AMLH? A: MC9S08DN60AMLH supports programming in C and assembly language.

  6. Q: Can MC9S08DN60AMLH communicate with other devices? A: Yes, MC9S08DN60AMLH has built-in communication interfaces like UART, SPI, and I2C, which enable it to communicate with other devices.

  7. Q: Is MC9S08DN60AMLH suitable for low-power applications? A: Yes, MC9S08DN60AMLH has power-saving features like low-power modes and wake-up interrupts, making it suitable for low-power applications.

  8. Q: Can MC9S08DN60AMLH handle analog signals? A: Yes, MC9S08DN60AMLH has built-in analog-to-digital converters (ADCs) that can be used to measure analog signals.

  9. Q: What is the maximum clock frequency of MC9S08DN60AMLH? A: MC9S08DN60AMLH can operate at a maximum clock frequency of 40 MHz.

  10. Q: Are there any development boards available for MC9S08DN60AMLH? A: Yes, NXP provides development boards like the DEMO9S08DN60A, which can be used for prototyping and evaluation of MC9S08DN60AMLH-based designs.

Please note that these answers are general and may vary depending on specific requirements and implementation details.